Skip to main content

Reply to "Transformer to run conventional Williams?"

I would try the diode method going to track power(inserting into the track between the transformer and lock-on power terminal first to see if you like that effect) rather than rewiring the motors in series, as you may not like the super slow effect.

 

One thing that happened by accident; I started a Williams GP-9 at wide open throttle with a ZW by mistake, and it sure took off, right off the track!! A few scratches on the side of my GP-9, but no real damage; nothing broke off and it still runs well today.

Was working on another engine and forgot to turn the power off before putting the plug back into the wall outlet.

 

Lee F.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×