Skip to main content

Replies sorted oldest to newest

This is great news to hear that RMT will be selling the SuperSnap line! I just bought a box of used SuperSnap track for $30. It had 3 10", 4 Track Terminals with surge protection, 2 Uncoupling Track, 3 90` Crossovers, 4 45` 31", 4 90` curve 31" and a Left 31" Turnout. This is my first experience with SuperSnap and I'm very impressed. My pre-war engine and rolling stock run better on it than on AtlasO track (flanges don't bounce on the ties.) I was worried that I would be on a snipe hunt trying to find more SuperSnap track.

I tried to make a figure 8, but realized I need special size track coming off of the 90` crossover. Does anyone know what size I need to complete the figure 8?
Originally Posted by Charlesp34:
Walter, will you be selling O54 curves?

 

I just looked in their catalog and found this for curves.  

0-31
0-54
0-63
0-72
0-81
0-96
0-120

Straights will be:
5"
10"
20"
30"
40"

So, I gues they will have O-54 after all. But I think it depends on how well they sell what hey have now. I plan to buy a bunch if they have another sale in September. 
 
Originally Posted by Gilbert Ives:

Anybody have any comments about Super-Snap?  Pros?  Cons?  Comparisons to other track?

I have and use this track on my Christmas layout. I love it it has held up good my only issue is that if you dont use Track pins in the Rails sometimes you loose power to the sections.  The tabs on the ends on the old style of the track are fragile and will break. also loosing connectivity.  With this said I have been using this track now for several years and I love the looks and the quality. That was the only downside i found to the Super SnaP Track.

Lionel kept the old 042 kline switches I think as they have been in there catalogs in the past. One Question for owners/users.How good are the 072 and 031 kline switches? Any problems ( switch motors, engines go through rough or bumpy, dead spots ect.)? They look good in the photos, but I have never used them. Feedback from users would be handy to know before purchase. Thanks!

to Lionelzw  - I have some of the 0-31  Older K line and Lionel K-line - 1 out of 5 has had problems - works for a while and the will on;y remotely turn one way ot the other. I've had 4 repaired by some one who can open them up and do resoldering on the fine wires in the switch motors.( I think that was what went). The 0-72 switches worked fine.

I used 6 of them for high speed movements as crossovers from one loop to another. Dont see very many on E***.

 

RMT has them coming out soon. I'm going to try a pair. Walter says they have improved them from the K-line design.

Originally Posted by Bobbie21921:
Originally Posted by Gilbert Ives:

Anybody have any comments about Super-Snap?  Pros?  Cons?  Comparisons to other track?

I have and use this track on my Christmas layout. I love it it has held up good my only issue is that if you dont use Track pins in the Rails sometimes you loose power to the sections.  The tabs on the ends on the old style of the track are fragile and will break. also loosing connectivity.  With this said I have been using this track now for several years and I love the looks and the quality. That was the only downside i found to the Super SnaP Track.

Hopefully one of the improvements is the use of ABS plastic. 

I have a 10 by 12 with 4 concentric loops all with original K-line 031, 072 and 042 switches.  About 30 switches on the layout.  I have only had a problem with one and it was easily fixed.  I like the track also, but I do add pins.

 

Lionel made all three switches and I have a few of the 072 versions.  They did not work as well, and required a higher voltage.  So hopefully RMT uses the original K-Line spec not the Lionel version.  G

Terry

 

I am building a new layout now.I installed the track but have not ran the trains yet. They look well made though. 

 

http://www.rossswitches.com/pr...tches/rossplate.html

 

I am using them for a hands off automated passing siding where  4 trains run, 2 in each direction.

 

My layout is display,conventional mode, mostly automated and normally I would avoid turnouts because of lack of reliability,so

 

It is important that they switch reliably and no derailments. Electrically speaking automating passing sidings is fairly easy to do with a few relays,the worry is derailments. I purchased these at York and Steve assured me of their quality ("our switches dont derail"). When I get the thing running I will post a review of the switches.

 

For those interested ,here is wiring for a passing siding with 2 trains.

 

http://www.jcstudiosinc.com/Bl...=856&categoryId=

 

As for the K-Line super snap track, www.Justtrains.com has some leftover stock in large diameters and RMT is having it remade. Best tubular track ever IMO.

 

Dale H

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×