Skip to main content

After almost a month of use.  I had seen all of the previous threads about the pilot bearing issue.  I thought I had dodged this issue.  I even took my train off the track and gently checked the pilot wheels after I saw the threads.  All seemed fine.  This morning I started running the train.  I noticed the number boards were flickering and that I was having a problem on one switch.  Since it was only one switch, I decided to troubleshoot that first.  I could not find anything wrong.  Then I decided to lift the loco to see if I could see why, whenever it crossed the switch it would spark and sometimes stop.  When I lifted the loco, the pilot bearing fell out.  Oh well, I sent an email to lionel to get replacements.  In the meantime, I jammed the bearing in the best I could to continue operation.  Seems to be running fine again.  I have no plans to glue it in place.

Original Post

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×