I need to stick these together. The shell is plaster and the building is resin. Both are done with Painters Tough gloss. The mating surfaces aren't all that smooth so I need some kind of gap filler adhesive. Help?
Use Zap-Gap or equivalent thick type with an accelerator. Plastruct makes a similar product that I use all the time called Maxi-Cure cement. Code for the thick type is CYC-3.
You could also use that good old Walthers Goo, then touch it together, then apply super thin ACC. The ACC does something to the Goo, and you will NEVER get them apart again!
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!