Skip to main content

It's like Christmas in December, fellows!

 

Today (Sunday) at 10:15 A.M. the doorbell rang.  It was the USPS delivering my AM Texas & Pacific set.  Big surprise! Through rain, sleet, snow, dock slowdowns, Christmas shipping crunch and some rare sunshine (it's been pretty gloomy around here all month...)

 

My last communication from Ron was on December 22nd and the shipment still hadn't arrived at AM.  He was hoping to get it to me by Christmas.

 

So, without further adieu:

 

Gotta be scale, it's marked that way on the boxes:

rAM T&P 121814 002

 

OK, enough of that now... 

 

In this day and age it's nice to open something up with no surprises.  The cars come with AM's Snap-Lock dummy couplers installed.  Four of the six cars have sprung bettendor trucks, the gondola unsprung roller bearing trucks and the caboose unsprung leaf-spring trucks.  The locomotives are fully assembled, but with no couplers mounted.  There's a package of Kadee 802's included in the box.

 

Seeing I had to pop the shells off to mount the couplers, here's a look at the insides:

rAM T&P 121814 004

Again no surprises.  The ever dependable AM drive, a neater wiring assembly than earlier models and an LED for the headlight on the short hood end only.  There's a small circuit board acting as a wiring manifold, but it's not a DCC plug.  Just something to make things neat and tidy.  There are holes for the Kadee's cast about half way through, so they do need to be drilled out to mount the couplers. 

 

Put 'er on the track and it runs.  Runs very well.  No muss, no fuss.

 

So, once the couplers are mounted and the shells snapped back on, the moment you've all been waiting for:

 

rAM T&P 121814 007

 

Here are the AM T&P GP9's in all their glory, along with a Flyer GP7 for comparison.  For its time, the Flyer model is pretty faithful to the T&P paint scheme as seen on this T&P GP7.  With today's technology, AM was able to have an accurate rendering.

T&P GP7 1111

 

A word about the orange version and the blue version.  Both schemes are "as delivered" from EMD.  GP9's 1131-1136 were delivered in 1957 in Swamp Holly Orange and Black.  GP9's 1137-1144 were delivered in the same scheme, but in MoPac Blue and Gray in 1959, after MoPac took a firmer grip on T&P operations.

 

So, here we have the GP's themselves:

rAM T&P 121814 008

Outside of the clean, sharp masking and lettering, the handrail ends and footboards are also painted orange per the prototype.  There's a small "F" printed on the frame indicating the front of the unit, EMD builders plates under the cab, numbers in the numberboards(non-illuminated), classification lights (also non-illuminated) and cab window frames highlighted in silver, cab glazing and headlight lenses. 

 

There's no overspray that I can see.  Other than paint, there is no T&P-specific detailing.

 

As on all AM GP9's, there are no grabirons, lift rings or air tank piping.  I've added these to all my other AM GP's and will probably get around to it on these units one day.

 

So let's stretch this set out, in the same order as in the ad.  I haven't yet added the included stakes to the flat car:

 

rAM T&P 121814 009

 

Still looks nice, even on my layout...

 

The cars are all standard AM products.  Again, no surprises.  From what I can find Googling around on the web, decoration is accurate.

 

Presenting the flat and boxcar:

rAM T&P 121814 012

 

Hopper and Piggy-Back flat:

rAM T&P 121814 013

 

Gondola and Caboose (illuminated) :

rAM T&P 121814 014

 

And a last over all look at the set:

rAM T&P 121814 017

 

In summary, it's a neat set and I'm glad I bought it.  I have no particular interest in the T&P and it had no trackage in Kansas, which I'm allegedly modeling.  It was an impulse purchase, pure and simple and a darn nice one.

 

Rusty

Attachments

Images (11)
  • rAM T&P 121814 002
  • rAM T&P 121814 004
  • rAM T&P 121814 007
  • rAM T&P 121814 008
  • rAM T&P 121814 009
  • rAM T&P 121814 010
  • rAM T&P 121814 012
  • rAM T&P 121814 013
  • rAM T&P 121814 014
  • rAM T&P 121814 017
  • T&P GP7 1111
Last edited by Rusty Traque
Original Post

Replies sorted oldest to newest

Originally Posted by RoyBoy:

Is the AM model slightly smaller than the Flyer version, or is it just a photo anomaly?

Both models are pretty much the same size.  The Flyer model sits higher.

rAM T&P 122814 019

There's a lot of daylight between the trucks and the underframe on the Flyer model due to the drive design. 

 

The Flyer model was a good model for its day and is fine in its own environment.

 

Rusty

Attachments

Images (1)
  • rAM T&P 122814 019

The motor in that Geep appears identical to the one in my AM Baldwin S-12 which made it impossible for switching duty.  I installed a NWSL motor/flywheels with the AM low speed worms...a big improvement especially for switching.  I plan to install a DCC decoder in the very near future.

 

Here's a brief video:

https://www.youtube.com/watch?v=gKsOsRCGXds

 

Last edited by Old Goat
Originally Posted by nctrains:
Rusty,  just curious.... Is the product US made?  In the picture the boxes don't have "Made in China" on them like the AM boxes from the Sanda Kan days.  The ad for the set seemed to im

 

Originally Posted by nctrains:
Oops I always do this... The ad for the set seemed to imply that the decoration wad done overseas.   Anything more specific on the product or packaging?

Nick C.

When I ordered the set at S Fest in October, that's exactly what Ron told me: The locomotives and cars were made in the US and decorated in China.  I didn't press him for specifics as to which companies were involved because I felt it wasn't my place to do so.

 

But, for those of you keeping score, here's what's on the boxes on the opposite flap:

 

Manufactured in China for American Models: Trailer, Caboose

Printed in China for American Models: Hopper, Box Car

Made in USA, Printed in China: Gondola, both Flat Cars

 

The locomotives have no build or printing origins on the box or inside.

 

Now, that said I'm willing to take Ron at his word.  The makings on the box are of little consequence to me. I would suspect Ron's using up packaging stock.

 

My IC, CB&Q, Texas Special E8's, ACL FP7's and New Haven U25B's are "locomotives without a country" while my Wabash Train Master and Burlington U25B boxes say "made in China."(All were made for AM by Sanda Kan.) 

 

Also, some of my AM "yellow box" freight cars likewise do not list a country of manufacture.  I seems to be an option.

 

Rusty

 

Last edited by Rusty Traque

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×