Skip to main content

Replies sorted oldest to newest

RailfanRon & gunrunnerjohn does that mean 3 jumpers per switch? I'm pretty sure that is where the problem lies but I'll check again tomorrow. One of my Atlas switch motors decided to overheat and I now have a fried switch motor! Of course it's not one of the two with the dead spots. That problem took precedence over the dead switch problem.  

MilwRdPaul/gunrunnerjohn

 

I had this page bookmarked about issues with Atlas Switches, that i thought would be useful to both of you.

 

http://www.welchpoint.com/atlas/

 

*EDIT 3/ 27/14* seems this link no longer works... But I saved the original PDF. if you'd like a copy, email me and I'd be happy to forward it on.  I am not the original author, I just saved it

 

I've had issues with the small wires on the underside of the switch burning out, but I have not had the other issues described there ( which may have been fixed with the "newer" Atlas switches.

Last edited by MatthewG
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×