Skip to main content

I just found this bill up at the Utah legislature. It would require that there be an Engineer and a Conductor on every train in the state of Utah. The bill is being run by the widow of the former president of the AFL-CIO in our state, so I am sure that its being pushed by the Unions. Just wondering if other states have seen this type of legislation and whats its effect would be

 

http://le.utah.gov/~2015/bills/static/SB0050.html

 

Would wonder how it would affect yard switching and remote control operations as well the operation of the commuter rail that has Operator, not Engineers. ALso if the feds were to approve one person operation would that override the state law?

Original Post

Replies sorted oldest to newest

I think the other posters are correct about federal law prevailing, for the class 1 railroads anyway. For the law itself, it seems to me having 2 people to run a train that can be 7,000 feet or more in length just makes common sense? The small town in Canada (which I can't spell the name of) might still be standing and the people killed could still be alive if that train would have had a 2 man crew? Also, as the old saying goes, 'two heads are better than one', which I think has a lot of truth to it. And people forget things, someone double checking means less things forgotten or missed too.

 

For the railroad yards, doesn't that require an engineer for the engine and then a ground mad for the switching and other things required for moving the cars around? I am not really sure how all that works? For commuter trains, I am not sure either, but it seems like maybe a couple of accidents in the last few years could have possibly been prevented there as well? Operator falling asleep or texting or whatever they have determined were some of the causes may have been able to be prevented with a second person also watching the operations of the train? 

rtr12:

 

A lot of railroad yards and many industrial rail operations utlize a single operator using a belt-pack device.  When switching cars, the operator stands on the ground using the belt-pack to control the locomotive.  The folks using this method actually believe it to be safer than having two or more people involved in the switching operation.  The guy controlling the engine is also the guy on the ground so you have no possibility of a mis-communication between the switchman and the engineer.

 

Curt

Originally Posted by juniata guy:

rtr12:

 

A lot of railroad yards and many industrial rail operations utlize a single operator using a belt-pack device.  When switching cars, the operator stands on the ground using the belt-pack to control the locomotive.  The folks using this method actually believe it to be safer than having two or more people involved in the switching operation.  The guy controlling the engine is also the guy on the ground so you have no possibility of a mis-communication between the switchman and the engineer.

 

Curt

Thanks, that makes sense. I have never really watched yard operations, although I live right between a couple of large BNSF yards, only a few miles from either one. Guess I need to get out more...

Chris:

Now you are asking me to dig deep into the old memory vault.

The caboose laws had more to do with labor objecting to dropping them than it did safety although, safety was the rationale used by those states that had caboose laws.  Once the unions had negotiated something they deemed acceptable, the state laws quietly went away.

In terms of whether the railroads paid any attention to them, I would agree with Jack, some followed and some didn't.

Curt

I want to correct something I posted yesterday in regard to the caboose laws.  Apparently my recollection was a bit faulty and in those instances, Google can be my friend. 

 

The caboose laws weren't enacted in the 1980's.  In fact, most had been around for quite some time.  They didn't become an issue with the railroads until the advent of end of train devices and the railroad's attempts to drop cabooses from trains. 

 

I mentioned Virginia in my post yesterday as I did remember cabooses being an issue in that state.  Virginia and Montana were among the last few states to keep caboose laws on the books.

 

And I'll tag onto what Chaos notes above.  Many states had railroad commissions that regulated the intrastate operations of railroads and trucking companies operating within the state.  Going back aways, some states (I recollect Mississippi and Texas being among them) had requirements that railroads operating in the state had to be incorporated in that state.  Without doing some research, I'm not sure when these state charter laws began to fade away.

 

Curt

Last edited by juniata guy

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×