Anyone have a source for a battery box cover for the CAB1? Mine hit the floor and busted the little tabs that hold it on.
Original Post
Replies sorted oldest to newest
Call me john. 314-814-1197. I think I've got one.
Hi John,
Until you locate a replacement... a SMALL drop of Walther's Goo or non-hardening, clear silicon caulk in the middle of each edge will hold it in place until you find that "treasure". That way you can remove the Scotch tape that's holding it now 
Either would allow easy removal of the broken cover without damage to the Cab1 case. Fresh batteries would last for quite some time and keep the "glue jobs" to a minimum.
If I had an extra, I give it to ya!!!!!!!!!!!
Best,
Dave
That's a ripoff.
They're $3.50 from Lionel for a gray one, $4.10 for a blue one.
Order the Gray one HERE.
Great! I found one.
Originally Posted by ADCX Rob:
That's a ripoff.
They're $3.50 from Lionel for a gray one, $4.10 for a blue one.
Order the Gray one HERE.
Do the blue ones fit the old cases? If so, I don't care the color if I have to replace mine.
They do fit.
Guns,
With all your millions just purchase the new 990 Legacy Cab2, and forget the cover for the Cab1 BB.
PCRR/Dave
I have a couple of Legacy systems, so I'm covered. 
The CAB1 is on my test bench and I dropped the remote.
Originally Posted by ADCX Rob:
That's a ripoff.
They're $3.50 from Lionel for a gray one, $4.10 for a blue one.
Order the Gray one HERE.
Great catch Rob! I just saw this listing ending soon right after seeing John's request. Figured I'd post it just so he would know its there.
Guns,
John you know I understand you have a couple Legacy Cab2's, I just could not pass up the opportunity.
PCRR/Dave
Dave, no more going for the cheap shots.
Guns,
You know darn well none of my shots are ever cheap, a little humor now an then among friends is always good. Hay take a look at the thread I started on the CC switch, got one
acting real crazy.
PCRR/Dave
