Skip to main content

     Just a word of advice to the OGR members. Today I was working on cross over jumpers for the double throw double pole switches for the Tortoise machines.   I soldered 80 (U) connectors to the 40 wires and when I was connecting the (U) connectors to the switch screws some did not stay connected.   That's when I realized some of the (U) crimp connectors were wider than others.   When I got the storage tray there were not enough compartments for all the crimp connectors I bought so I put the small and medium (U) crimp connectors together.  I had forgotten about this so I now have 18 wires I can't use because no matter how hard I push it down on to the screw they keep pushing back up and won't stay connected. Another thing I did wrong is I made all the wires the same length and when I try to put the 2nd wire on the switch it is not long enough to reach over the 1st wire to the other screw. Take it from a jerk of all trades and a master of nothing try to organize your thing better than me.  Choo Choo Kenny

Original Post

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×