Skip to main content

Just a public service announcement here and maybe others have already discovered this, but went to wire both my 16826 FT CC Remote O-72 switches to Auxiliary Power yesterday after pulling the jumper from Track Jumper and Aux In.  After extensive troubleshooting, I discovered Track Jumper worked as the Aux In.  Probably wired incorrectly at the factory.  Hooked up to Aux Grd and Track Jumper, worked like a champ.  What should have taken me a few minutes, ended up taking hours  

Original Post

Replies sorted oldest to newest

Same here..took a bit to troubleshoot. The switch would chatter-sometimes not switch.

The fuse would blow...The orientation of wiring for the aux/track block is different on the left and right switch. They wired my right for a left...

 

I assume that you were wiring the switch for AUX power and never tried track Power..

If you did the switch would work/chatter and eventually blow the resistor fuse.

Last edited by shawn

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×