Skip to main content

I currently have my ground plane wire connected to my DB9 serial connector Pin 5 on my Y cable between my TMCC and Legacy controllers.  I am going to be adding some ASCs so I need to connect to that DB9 serial connector.  Where do I now place my ground plane conductor?  Should I piggyback the ground plane to the COM terminal on last ASC? 

Attachments

Last edited by Steims
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×