Skip to main content

I just finished my first segment of bench work and thought I'd share it with you fine folks. I've got a long way to go to be able to run my N&W articulated engines higher than floor level but it's a start. I've tried to adapt an under arch span bridge theme reminiscent of Lionel's Hellgate bridge. It's made of steel and so far it's pretty strong and near impossible to knock out of square. My 160 pound son sat in the middle of the long span and she held with next to no deflection.

The next effort will be to construct curved segments capable of carrying O84 curves.

Attachments

Images (3)
  • image
  • image
  • image
Original Post

Replies sorted oldest to newest

Originally Posted by ryangreta:

I've been inspired by the folks at TW Trainworxs and their re-creations of Lionel display layouts from the 1950's but knew they were beyond my budget. So I set about designing and building in the media I know best, steel.

 I was gong to ask if the table was metal, but then there are forum members who have excellent wood making skills. Just didn't want to embarrass myself .  Looking forward to seeing your work when your finished.

The table system was designed with the intent to sell to the masses. There are no visible welds anywhere on this table. It is a completely bolt together system and the largest part is 45" x 33" x 1 1/2". If there is any significant interest in this system, future product will be powder coated. I think red, green, and satin black will be the colors. In my opinion, I have to stay competitive with the tinker toy brand pricing. There will be significant value added over and beyond what those folks offer though.

Originally Posted by ryangreta:

Packaging to avoid the high freight charge, marketing, and powder coating are my last obstacles. I will be discussing advertising with OGR shortly. The idea of the fastener was to make it resemble a rivet. Bolts painted to match would look pretty good and I will look into it.

Thanks,

Ryan

Ryan,

You have it. It does look like a rivet.

 

Then I drifted, thinking of a flat post and extra center supports to put multiple units together.

 

Any thoughts for feet? Lots of hardwood and laminate trainroom floors out there.

 

You have a nice idea. have fun and good luck.

 

PS I like the pre-war colors.

The legs are set up to accept leveling feet. I'm still shopping for the best bang for the buck there. When I first started designing this table, I toyed with the idea of incorporating splice plates with "rivets" either formed into the plates or more prolific use of rivet looking fasteners. I opted for a streamlined approach to reduce part count, keep with only one type fastener, and ultimate cost.

Ryan

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×