Skip to main content

I had to admit that i probaby did not have the where with all to complete this project.  finished walls (studs) first layter of floor, and window inserts ready, but just not sure about hauling 4X8 sheets of 1/2"OSB up ladders to the roof, and had to make all the rafters.  Made all the rafters, layed out a jig on the floor and cut 2X4's with both plywood and steel gussets.  Made thirteen in all on 16" centers.

but had to hire a crew to install rafters, and put plywood down and tarpaper and shingles,  decided to redo the original roof, and repair and re shingle. (was a good idea, one of the plywood pieces was damaged from water)

ready to lay flnal floor, windows, one door from shop to layoutm cover the whole thing with tar paper and then shake cedar shingles

16X12' addition to existing shop, all railroad

Last edited by pelago
Original Post

Replies sorted oldest to newest

one thing that slowed me down was the original building needed some work, had to put in a new floor and actually jack up the structure and remove original ply wood and replace with pressure treated 2X6. also put in new base plates, when i built it 30 plus years ago, i really did not know much about treated wood and it lasted but if i was going to put more time and money in building then i had to upgrade, now quite strong and stable, plan on putting some underlayment over tarpaper down over 2X6 and peel and stick tile in both rooms,  the new room will have 1/4" luan walls with 1/4" furring type strips over seams and nail runs, then paint. later on will put up some kind of ceiling, might be able to get reclaimed wood and tongue and groove some for ceiling.  room will have 30 amp service, and air conditioned, heat will have to be kero heaters, but they work pretty good

My first "trainroom" was a specially built separate building next to my new home.  It was 32 by 26 with open ceilings and special lighting.  Unfortunately, all I got done inside was the display shelving before a "life change" occurred. 

 

I know you must be excited and it looks like you will have a great area for the trains!

 

Alan

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×