Skip to main content

Replies sorted oldest to newest

The wavy part up top are big 0120's...was told to consider breaking up the "racetrack" and I am glad I did. Plan on putting some nice scenery there.

The wave on the reverse loop is to get around the support column.

Yes this is away from the wall so you can walk around it. Measures 20'x76" with the L 4'x5'

Center will be a bit touch to reach..but I can do it.

I plan on buying a few more kits for the town section on the left. 

Where would you guys put the road,or roads and how would you set up the town? I know I want to use sidewalks and some parking.

Similar "L" to my subway design but on a smaller scale.  There is no need for the switch on the brown line at the bottom as you cannot get into your yard tracks when a train switches from there.  If you could somehow get rid of the wave that would be a plus.  If you eliminate the switches on the green line at the right and widen the loop you could perhaps extend the brown line into the loop along with the green line so you can have both lines go into your tunnel.  What this means is the elimination of 4 switches and the wye and less complications.

Last edited by Joe P

Add Reply

Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×