In a moment of delirium, I just purchased both a B&M and a B&A K-line Scale Berkshire with CRUISE.
Of course, I do not have a manual for either.
According to what GRJ posted in the reference section, the Reset code should be 78 for Cruise with puffer.
Add on from OGR Forum:
Here is the correct reset code for a Kline command engine with cruise.
Engine 99, then set, then eng 1 (or whatever you want you final ID to be) then set;
then Aux1; next, this is important, 7,8. The 7 tells it that it has cruise and the 8 is
Lionel’s code for steam with puffing smoke.
My only other K-line Loco with cruise is a B&A 4-6-6T. The manual says to use 74. This has a smoke driven fan and of course is "Tetherless" LOL which is what Lionel says this code is for. But it works fine.
Does anyone have a manual for these locomotives and can post the code from the manual? At this point, I do not care about the whys, just the factory specified code. Thanks.
