Skip to main content

New from the factory when I bought it. Unwrapped for the first time I discovered a paint chip.It appears that there was not good paint adhesion. The other shell is fine and there is only this panel section that has an issue. The set operates fine. I have been searching everywhere for a replacement shell with no success. As I started to do a repair, more paint would flake off. I guess it is a good thing that the damage has stayed in one panel section. I am losing patience and am very close to trashing the whole set. In fact my wife discovered the set in the trash can and pulled it back out.

 Would you:1) trash it all

         2)weather the bad shell and run a newer looking and a weathered unit together

          3)give it away on Ebay

These used to be nice but since I cant find a replacement shell and have lost initiative to do a paint repair I thought I might get some opinions. Since I have the MTH Levin set and the K-line Jade green set at least I am not without motive power.

 

Attachments

Images (4)
  • 100_3294
  • 100_3295
  • 100_3296
  • 100_3297
Original Post

Replies sorted oldest to newest

That paint repair looks to be doable. If there is one thing I've learned building passenger car models is patience. You can only do one step and then you have to walk away from that car or you will cause a problem , that's why I try to build 5 at a time.  An old used tooth brush cleaned well and left to dry overnight  should scrub off any more loose paint. Then you can see how large the repair will be. I believe that the K-line paint matches pretty close to Scalecoat 2 don't use scalecoat 1 on abs or plastic.. Patience is the key. explore , plan , execute and be happy with your results. I hate everyone of the cars I have built because I know where all the flaws are. An older more wiser guy from Florida told me to be critical and I would improve. He was right. And if you wont give it a shot PRR passenger is my favorite and you could sell em to me

What a shame...  Very sorry this happened to you... Do yourself a favor, set it back, and give it a break, and look at it through fresh eyes.... in a week or so an idea may come to you and you will find a solution that will present itself.... I wouldn't sell it off for a loss, I honestly believe a careful touch up will take care of this, and when it's going down the track you wont even notice it!  

aterry11:  "I hate everyone of the cars I have built because I know where all the flaws are."

 

 

I'm always disappointed and having multiple projects does offer the opportunity to "walk away" when it gets intense.

 

For the OP, good advice re defining the scope of the existing paint problem and then decide on your course of action. 

Since the defect is limited to just one panel, and Scalecoat 2 is such a close match, if it were mine I would touch it up.  (Prototype locos could have mismatched paint repairs, too). 

 

But if you're totally disgusted by the defect, maybe setting it aside for a while or selling it would be best.  I can certainly understand if you do not have the inclination to work on it.  I've had defects on most of my K-Line stuff, too, but not paint. 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×