Skip to main content

BWRR posted:

and less $$ to boot.

To late I have already ordered 132102329553, I am sure10s max will be fine for what I want to do.
The board has shipped, delivery is in a couple weeks.
I'll rig it up and report back when I have it

as promised report when implemented.  It works great.

 

lights

this first picture shows how it is hooked up.  When I built the sensor board I did not populate the jumper header or the relay. These lights are running on 14V AC, on on the NC side, one on the NO side

This video shows it working with the lights.  you can see that the NC light stays on, with a quick switch to the NC as the sensor is triggered.

 

house

This picture shows hook up to house

 

 

video shows house working perfectly

 

Thanks alot guys

Attachments

Images (2)
  • lights
  • house
Videos (2)
lights
house
BWRR posted:
BWRR posted:

and less $$ to boot.

To late I have already ordered 132102329553, I am sure10s max will be fine for what I want to do.
The board has shipped, delivery is in a couple weeks.
I'll rig it up and report back when I have it

as promised report when implemented.  It works great.

 

lights

this first picture shows how it is hooked up.  When I built the sensor board I did not populate the jumper header or the relay. These lights are running on 14V AC, on on the NC side, one on the NO side

This video shows it working with the lights.  you can see that the NC light stays on, with a quick switch to the NC as the sensor is triggered.

 

house

This picture shows hook up to house

 

 

video shows house working perfectly

 

Thanks alot guys

Looks Great, I know down the road I will try something like that for me. You are right about one thing Stan is a great help here on the forum!

GRJ, I just found the time to assemble the 8 kits I got from you many months ago.  My compliments:  the kit is first rate--easy to assemble and the board is well labelled.  Was enjoyable to do.

That was a good recommendation you made:  install the smallest components first so you can lay the boards upside down and the workbench holds the parts in place.  I did find it useful to have a large illuminated magnifier, to check each joint.

Dave, I still have some kits, drop me an email.

I haven't made progress on the TMCC booster, real life has gotten in the way.  I'd like to get the schematic from Dale's family, it would really speed the process.  I wasn't counting on having to reverse engineer the hand built prototype, really adds to the workload.  I may have to punt on that project and hand it off to someone else.  I'd be glad to do the PCB, but having to reverse engineer, build a prototype to see if I got it right, then do the production layout and schematic, etc. it more time consuming that I had counted on.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×