Skip to main content

Here are some latest photos taken of a few of my many O-Scale IRT (Interborough Rapid Transit) wooden Elevated Division Open End Platform Gate cars. These type cars served all the four original (2, 3, 6, 9 Avenues) Manhattan EL's, and the IRT Flushing and Astoria EL's, and parts of the Woodlawn-Jerome and White Plains Road EL's in the Bronx. The last of these IRT "EL" Division open end platform gate cars ran  up thru April 1953 running by then solely on the IRT Dyre Avenue then-Shuttle Line since 1941.

They are seen here on this Thread page operating on my O-Scale N Y City Model Transit System "EL" Layout. 

For much more photos (and videos)  -- here are links to four of my photos websites for this Layout;

============================================================================

 FLICKR PHOTO ALBUMS Page (Photos displayed by topic, subject, etc)

FLICKR MAIN PAGE -- Random photos with newest shown first)

My Layout VIDEOS PAGE - on You Tube

My Website I custom built for photos and description of the Layout ---  http://www.wtv-zone.com/NYCity...m/NYCityModelTransit

=============================================================================

Anyone else here have models of and/or operate these type early era IRT (or other system) cars on your layouts ?

Regards !! - Joe F

IMG_1547

IMG_1566

IMG_1564

IMG_1557

IMG_1548

IMG_1549

IMG_1546

 

IMG_1559

IMG_1551

Attachments

Images (9)
  • IMG_1547
  • IMG_1566
  • IMG_1564
  • IMG_1557
  • IMG_1548
  • IMG_1549
  • IMG_1546
  • IMG_1559
  • IMG_1551
Last edited by Joseph Frank
Original Post

Replies sorted oldest to newest

11883877025_fffbe139a2_b

 

Hello ART !

 

I remember very well the Brooklyn NY old BMT Myrtle Ave EL !! - 

 

Here is the LINK to my photo album of my O-Scale BMT EL Car Models

 

https://www.flickr.com/photos/...s/72157625966252884/

 

 

ALSO - Here are a few  photos of some of my scratch-built O-Scale BMT EL Gate cars -- in scenes on my "EL" layout that mimic the "Old Myrt".

 

I rode and photographed the Myrtle EL extensively from about mid 1956 thru its close in Oct. 1969. Rode the BU Gate Cars there and the later "MUDC" Q Types.  The "Q"'s were my "old friends", heh, from their recently being removed from revenue service by Dec 16, 1956 from the IRT Division 3rd Avenue EL.  They served on that Manhattan & Bronx EL line from May 1950 thru May 12, 1955 - and served 19 more months on the Bronx remaining part of the line.  They were stored on its then no longer used center express track...until mid 1957 and gradually over many following months removed in increments, to Coney Island BMT shops for overhaul for the Myrtle EL. And by May 1958 replaced all the BMT 1300 Series Convertible BU EL Gate Cars for Myrtle El service.

 

Fond memories riding the Q's on the IRT 3rd Ave EL - and from mid 1958 thru Oct. 1969 on the BMT Myrtle Avenue EL ! 

 

Anyway - enjoy these photos of some of my BMT BU EL Car O Scale models !

 

Regards - Joe F

 

 

11883876355_06aee6895c_b

11902598336_c8f268e266_b

11884145085_44f87624e0_b

11884097644_b2f29f36e6_b

 

11884097664_999e0c4c27_b

 

 

 

 

11884097464_8572266d17_b

And PHOTO BELOW is my O-Scale Q-Type train entering a center island platform station just as on the Myrtle Avenue EL !! As you likely remember them between 1959 and 1960.

 

 

5455098516_8a619b381f_b

Attachments

Images (9)
  • 11884097464_8572266d17_b
  • 11883877025_fffbe139a2_b
  • 11883876355_06aee6895c_b
  • 11902598336_c8f268e266_b
  • 11884145085_44f87624e0_b
  • 11884097644_b2f29f36e6_b
  • 11884097664_999e0c4c27_b
  • 11884097464_8572266d17_b
  • 5455098516_8a619b381f_b
Last edited by Joseph Frank

The Q's had a very long and interesting Service life. These cars were rebuilt with closed ends and operating  doors from BRT BU Gate cars originally built in the first decade of the 20th century. The rebuild occurred in the late 1930s to provide BMT equipment for Worlds Fair service in 1939-40 for its share of the jointly operated Flushing and Astoria Elevated lines. They were painted in the NYC colors of Orange and Blue. They worked on these lines until 1949 when the Joint IRT BMT operation of these Queens Els was eliminated. The cars were then transferred to the 3rd ave El operation in Manhattan to replace composites then in service on that line. When they came back to the BMT in the late 1950s they ran on the Myrtle Ave El until 1969 when the line south of Broadway was closed and torn down. So0me of these cars were used in work service on Pump Trains. A set were preserved for the NYCTA museum and another set was rebuilt into Gate cars from whence they came. I saw a photo of some of these cars in the 39th street yard looking like they were on their way to the scrapper. The NYCTA had a long service and use period for this design spanning almost 100 years from when the cars were originally built as gate cars.

 

Gate cars ran on the BMT in the post war period on the Lexington Ave, Myrtle Ave and Fulton Street lines. During the war they ran to Park Row over the Brooklyn Bridge . After the Fulkton Street El was closed in Brooklyn, there was a special service on the Fulkton street El in Queens through Atlantic Ave, the Broadway El and the Lexington Ave El onto the Myrtle line, to Park Row and then as far as Bridge and Jay Street afer 1944 . This operation lasted until 1950 whenn the Lexington Ave El was closed and torn down. BU convertible Gate cars continued to operate on the Myrtle Ave El until 1957-58 when the Q cars replaced them. They have been the last convertible gate cars in service on the NYCTA .

 

I would like to see MTH or Lionel make a set of these cars . They are an interesting prototype and weree the mainstay on the NYC Els in those early years until the LoV;s on the IRT and the Standards on the BMT came along.

Hello LIRR Steamer

 

Thanks much for posting all the historical info ! I would have done so as I likewise know all of that history - but I was already writing too much, heh.  Glad you joined in with the excellent background history.

 

Well, to visually add to your historical data - here are some "model photos" on my "EL" layout to show in that "era", what the 1939 WF "BMT era" Q-types (for "Queens") looked like running on the EL along with (via Manhattan IRT 2nd Ave EL service to Queens via the Queensboro Bridge upper level, of course) IRT MUDC "EL" Cars.  And the IRT Standard body subway cars and the then new 50 car fleet of 1939 WF Steinway Body -- Low V subway trains. 

 

regards ! - Joe F

 

 

113_113

116_116

126_126

145_145

156_156

109_109

Attachments

Images (6)
  • 113_113
  • 116_116
  • 126_126
  • 145_145
  • 156_156
  • 109_109
Last edited by Joseph Frank

Hello Cocoloco !

 

Thanks also for stopping and taking a look here !

 

Here are a few short video clips copied from a VHS-C tape video I shot with my camcorder back in 1998 on my NYC EL Layout.

 

Seen is my fully scratch built train of O Scale IRT Manhattan EL MUDC (Multiple Unit Door Control) EL cars operating, as seen from a rooftop view, and one from a station platform view, as a local into one of the local stations on my EL...stopping, and then departing.  Also a platform view of one of my O-Scale IRT EL Gate Car trains entering a local station. I hope the videos play OK here on OGR.

 

The prototypes of these IRT EL cars last ran (and I rode them frequently) on the Manhattan (until 5-122-1955) and Bronx (until 12-15-1956) 3rd Avenue EL.

 

About 450 or so of these prototype cars were conversion-created by the IRT shops in 1923 after being converted at that time to closed end vestibule MUDC Door cars from Open End Platform Gate cars, originally built between 1901 and 1910.  The Manhattan 3rd Ave EL was my hometown neighborhood line while growing up.

 

Riding the 1300 series BMT EL Gate cars from 1955 thru May 1958, and the Q-Types (also fresh then from the Bronx IRT 3rd Ave EL service thru 12-15-1956) both on the Myrtle EL,  was a great pleasure and a continuation of many numerous "nostalgic  riding trips back in time"  until the remaining BMT Q-Type wooden EL cars and their lower portion original Myrtle EL ceased operations in October 1969.  The end then of the old wooden EL car operations era in NY City, and the USA !

 

Regards - Joe F



Attachments

Videos (1)
MUDCS Approach-Leave STA-ROOFTOP head on--Smooth-Good
Last edited by Joseph Frank

The three BRT Gate Cars last operated on a fan trip to Rockaway about 7 years ago. We boarded a train of R1-9 cars at the Columbus Circle station of the 8th Av. Line and traveled to the East New York Yards where we transferred to the 3 gate cars and proceeded across Jamaica Bay to Rockaway. Wow what a ride going across Jamaica Bay at 45 mph. Hope the cars will operate again someday.

Hello Ed (New Haven) ---

 

I have provided two You Tube Videos of the BU Museum Gate Cars in operation:

 

One is a VIDEO LINK to that trip in 2006. Its a full length (long) video.  It ran from the Linden Yards in Brooklyn to the ex-LIRR now IND Rockaway Line via the remaining short portion of the BMT Fulton St EL connection in Queens.

 

Here is the Video LINK URL:   

 

https://www.youtube.com/watch?v=y0pxeQGgfz4

 

Here is a shorter second video of the same train riding on the BMT Astoria EL in Queens - probably some earlier year, as filmed from one of the open platforms between two EL Gate cars.

 

Here is the Video LINK URL:    

 

https://www.youtube.com/watch?v=eQNRRi__Ct8 

 

I'm sure you will enjoy both of these videos.  Videos of those Gate cars running are rare to find.

 

I am sure you are aware of, but for other readers not so, these 3 EL Gate cars were ORIGINALLY built new back around 1901-04 as BMT Open end EL gate cars, and converted to enclosed ends MUDC class "Q" Type cars in 1938 for the 1939-40 NY Worlds Fair "BMT" shuttle services - running back and forth on the then owned and operated IRT Flushing & Astoria EL's from Queens Plaza Jct Station to either Flushing or Astoria line terminals.

 

In May 1950, they were all modified with IRT ex-Composite Car Motor Trucks that were installed on the A and C cab-control cars only, the B trailer cars retaining their original BMT Peckham trailer trucks,  for Manhattan-Bronx IRT 3rd Ave EL various services until 12-15-1956.  Returned to the BMT for Myrtle Ave. EL service from May 1958 thru October 1959.  And 99% of that Q-Car fleet was scrapped by 1971.

 

Three Q-Type cars - seen in these videos - were "re-converted" in Coney Island BMT Shops in 1974-75 back to full gate cars, albeit still retaining the "lowered" clerestory roof done between 1960 and 1963 to ALL the Q-Types for Dekalb Avenue subway tunnel clearances to get them thru and to Coney Island Yards for major shop repair work.

 

Here are some photos of my O-Scale BU Gate Car models, scratchbuilt, of 3 types of BMT EL Gate cars as they appeared in original BRT (Brooklyn Rapid Transit) livery colors back in 1901-4

 

My 3 "BRT" era Gate cars are a 1200 Series Motor, an 800 Series Center Door Motor, and a 100 series trailer.

 

regards - Joe F

 

 

IMG_1162

IMG_1164

IMG_1473

IMG_1472

Attachments

Images (5)
  • IMG_1162
  • IMG_1164
  • IMG_1473
  • IMG_1472
  • IMG_1474
Last edited by Joseph Frank

To Joseph Frank:

 

Thank you for posting the video. I was right up front most of the time with Bill Wall that day. It was sure great riding those cars. I believe that was the last time the cars ran in fan trip service. I also rode them in 2004 between Brighton Beach Station and Kings Highway for the 100th anniversary of the subway system and when we rode them on the West End Line going to Coney Island and returned on the Brighton Line. I know that when talking to Bill that he and one of his motorman friend's would take a set of the various vintage cars out and ride the system from time to time. I last spoke to him earlier this year. I use to visit him at his office located in the office building in the Westchester Yards in Bronx. Yes I had read about the history of these cars and how they came to be saved. Thanks to Mike Hanna the dean of the subway system for getting many of the old cars saved.

 

Please contact me at: edmickey@optonline.net and we can talk more on this.

 

 

Two of these cars, 844 and 889, are preserved at the Western Railway Museum in California. When the Ninth Avenue El was closed in 1940 a large number of the open platform gate cars were put into storage. When WWII started about 80 of these cars were shipped to California. Most were used on the Shipyard Railway which ran from Oakland to the Kaiser Shipyards in Richmond. The railroad was owned by the U.S. Maritime Commission, but was built and operated by the Key System. Two of the Shipyard Railway cars still exist at WRM. The are now SRy 561 and 563. A picture of them can be seen at http://www.rypn.org/forums/vie...amp;p=224414#p224414

 

 

Last edited by David Johnston

Hello David ( Johnston ) ----

 

Thanks for the added info, and I am also long well aware of the history of the EL's and their rolling stock, and of these two Manhattan EL Gate cars in the Western Railway Museum.  I have a folder filled with photos of the before, during and final restorations ongoing on these cars thru the past years.

 

ALL of those cars sent to California (and elsewhere) were the former steam engine-hauled era  trailer cars converted to electric MU Control Motor cars in the 1900-1903 period, of the 6-4-6 Window configuration.  One other car was also running for decades at the Kane and Knox Railroad in I think, Pennsylvania.  I don't know the condition of that car at this time. BERA (Branford) Museum has IRT EL Gate Motor Car 824 in storage for the past 50 years !

 

Regards - Joe F

Hello Again Alan !

 

Again - your regularly posted support is appreciated and thanks again.

 

Here are some random short You Tube Videos of my Layout (URL LINKS to same) provided below that you may enjoy

 

https://www.youtube.com/watch?v=pPEXyv2auYk

 

https://www.youtube.com/watch?v=4Qwy3vr0ka0 

 

https://www.youtube.com/watch?v=llkmNtZ2LnM 

 

Also attached are a few "night" scenes on and along my EL System.

 

And Happy New Year - Alan, and all !

 

Regards ! - Joe F

 

 

IMG_5794

IMG_5807

IMG_5816

IMG_5933

IMG_5936

Attachments

Images (5)
  • IMG_5794
  • IMG_5807
  • IMG_5816
  • IMG_5933
  • IMG_5936
Last edited by Joseph Frank

Amazing, amazing stuff!  Thanks for sharing. The El structures looks very real. we too are about to add an El to our cityscape and really curious to know more about your El.  Like where it came from (a supplier? scratch built?) and what shade of green color was used for it?  plus I like how real the black and white stripes are at base of each column!  And the platform lighting looks great - where did this come from?  Very cool stuff.  Peter 

Hello Peter (PJB)  --- 

 

Sorry for the reply delay - very busy lately -- so I will herein try to answer your questions.

 

The entire EL Structure and its EL Stations and their structure outrigging are built totally scratchbuilt using various PLASTRUCT structural H and I beam shapes....and also wood segments for most track girders, built up to look like plate girders..

 

ALSO the  EL Station Stairways are all TOTALLY BUILT from scratch,  using variously wood, plastic, cardstock, PLASTRUCT girder shapes, etc.  The Stations were painted Pullman Green to represent a similar 1940's era green hue used on real NYC EL's.  The Station roofs are painted with Oxide Red Primer to replicate the colors on the real roofs.

 

Here is a complete "construction materials list" that I provided on another OGR "Subways Forum" thread of August 22,  2014 titled "N Y SUBWAY STATION PLATFORM".  My list below is quite extensive and long - I suggest you copy, paste and PRINT it on paper for modeling referrence.  I suggest you ALSO  LOOK UP that thread and my many postings and photos there of the layout and trackwork. Here is the LINK to it:

 

https://ogrforum.ogaugerr.com/t...way-station-platform

 

I also make use of various types and thicknesses of cardstock and Evergreen and Plastruct sheet plastic material (even index card stock) for certain structural applications, details, and finishing materials !   Here below is a printed listing I created long ago outlining what I basically used to construct my EL structure "steelwork" and also for creating the EL style  track work: EL TRACK started out as ATLAS 2 RAIL Nickel Silver scale Track.  Most of the track in my surface ballasted EL Yards is all hand cut ties and hand laid, spiked rails. 

 

======================================================

 

O SCALE N.Y. City EL Structure and Track Fabrication methods used by  Joseph Frank on his O SCALE EL Layout:  COMPLETE LISTING BELOW:
 
========================================================
 
IF you USE WOOD - use ONLY BASS (strong) and NOT balsa (very soft and  spongy) wood for all track or EL structural (ie: Track Girders deck work,  etc) 
 
My measurements for bass-wood items can also apply to optional  use of Evergreen Styrene shapes also --your choice -- however wood  "looks and paints" better!  Using Atlas O SCALE 2 rail scale Flex  or snap track for track work, I use the following for:
  
(1) -- TRACK GIRDERS -  and CROSS SPAN GIRDERS going from EL  Column to Column
________________________________________________________________________
Bass Wood 1/16" x 1" for track girders AND 1/8" x 1" for CROSS (Span)  Girders - your choice to use either type for either application..  however I prefer the 1/8" thick units for strength on CROSS SPAN   girders. The depth of your girders will be a scale 4 feet and track girders  could be made to 12" (48 feet) lengths. To economize you can do 44 feet  (11") lengths to get 2 track girders from one 22" long bass wood strip  "girder plate" - your choice.
 
 
 
(2) -- Flat "plate girder" strips final Finishing Details
___________________________________________________
These wood plate girders are then faced off on both sides with  either "hat" strips or "T" strips 3/32" wide spaced every 1 inch (4 scale  feet)  along the girder sides to represent plate section joint-seams. 
 
And finally, installing are Top and Bottom web-flanges of track girders --- 3/8" x 1/16" strips -- I prefer styrene strips "ACC'd" to the  wood track girder sections tops and bottoms.
 
 
(3) -- LONG WOOD CROSSTIES -- 1/8 x 3/16" For O SCALE ATLAS 2 Rail Scale  Track.
_________________________________________________________________________ 
The size can be increased slightly for thicker  Gargraves Wood ties  (to match end profiles) or for other types of 3-rail track tie thicknesses  ---your  measurement decision;
These strips come in 22 inch lengths.
 
(4) -- TRACKSIDE WOOD GUARD TIMBERS -- 5/32" x 5/32"
________________________________________________________
These match height of - or can be a tiny tad lower than) scale 1:48 size  Atlas O Scale solid T rail -- YOUR size will (should) reflect the size of  the track running rail on the 3-rail track of your choice--and should be a  tiny tad below the rail top height to insure clearance of truck sideframe  bottoms of ALL trucks of any cars you run on your EL.
 
NOTE:   These in modern times (over the last 15 years) are replaced  during major track rebuilding by apprx. 4 real inches prototype wide steel  strapping...check nycsubway.org website for photos of trackways in present  days for the "look" of these straps.  Much of the system still has the  wood, however.
 
 
(5) -- WOODEN  CATWALK  PLANKWAYS -- 1/16" x 1/8"
____________________________________________________
This size would remain standard no matter what brand 2 or 3 rail track you  use.
 
 
(6) -- OUTSIDE 3rd RAIL CHAIR BLOCKS
_____________________________________
These I cut square blocks from  3/16" x 3/16" wood strips of 22' long each.
Can also use Solid STYRENE strips of same size.
 
 
 
(7) -- OUTSIDE "EL STYLE" Uncovered THIRD RAIL
_______________________________________________
I use  HO Code 100 rail for 3rd rail with  1:48 2 rail track  running rail - or optional code .125 rail if you are using larger than code  148 running rail size on 2 or 3 rail track.
 
I model pre-1960 IRT and BMT "exposed" early "Elevated style" third rail  for joint subway paddle shoes (which slide under a covered third rail "cover  board") and "elevated car" drop sled shoes which drop down onto and ride on  top of the 3rd rail -- thus not allowing use of a cover board.
 
 
(8) -- THIRD RAIL COVER BOARD -- OPTIONAL
______________________________________
This is prototype for todays NYC Transit and LIRR present 3rd Rail  System  --- you must fabricate the third rail cover using 1/16 x 1/4" 
 
Support "bracket straps" from the ties to the cover board can be made with  thin strips of solid brass or steel wire or flat narrow brass strips. A  tedious job as you will need (heh) hundreds of these for the cover boards'  supports over your third (outside) rails.
 
 
(9) -- "EL" SUPPORT  COLUMNS -
____________________
I use PLASTRUCT ABS Plastic - Plastruct column size H-10.  This  is a very strong plastic material.
 
 
 
(10) -- INSIDE OF TRACK GUARD RAILS (between running rails)
_________________________________________________________
Code .148 or slightly lower (smaller) rail --- for my Atlas O Scale 2  Rail Track. The Guard Rails should NEVER be higher (better just a bit lower)  than your running rails to clear truck motor bottoms, gears on wheelsets, and  those "un-coupler tacks" on MTH subway Car couplers, and etc.
 
(11) -- CURVED FLANGE-BEARING Guard RAILS 
_________________________________________
For my Atlas O Scale 2 Rail Track I use Code .148 rail butted  close (rail web to rail web) to the code .148 running rail to form the narrow  slot that causes (as in prototype) the back of the wheel flange to slide  along the "curved Flange rail" --which guides the inside wheelsets on a curve  around the sharp curves and prevents the outer wheel from trying to ride up  or over the ouside curved rail. This architectural and engineering design is  what 
causes the "squeals" on sharp curved EL and subway Tracks...and crews  periodically "grease" these flange rails !!
 
NOTE: ABOVE DETAIL NOT RECOMMENDED for 3 rail operation ! 
 
I use pro-scale .135 tread and flange scale steel 30" & 33" insulated  2-rail NWSL wheels on scale profile T-rail Atlas solid rail track, which in  this case operate like the real wheels on flanged curve tracks. MTH subway  set wheel Treads are too wide and flanges TOO THICK to clear  scale-dimensioned (as I have) "curved-flange- rails" slots . This technique  is also used on my scale switch tracks ---
BUT ALSO NOT Recommended for 3 rail switches per MTH wheelsets either. 
 
(12) -- CATWALK RAILINGS
___________________________ -
I use PLASTRUCT ABS Plastic Item # HR-8,  O Scale Railings
 
 
(13) -- ASSORTED SIZES LATTICE STRUCTURAL GIRDERS
__________________________________________________
--for spans, braces, station roof framing and support columns -- get  "Central Valley Bridge Girder" kit packages...part 1902-5.     Also Check out PLASTRUCT various sized Lattice girder items of same.
 
I hope this info helps any O Scale Modeler-readers somewhat.
Its ALL the tiny details collectively that make the structure and track  work look good!!
 
Go to my FLICKR ALBUMS Website Photos Website, at:
 
 
Also see my PHOTOS ALBUMS PAGE at FLICKR - each album covering various segments of my layout and rolling stock in photos...at:
 
 
 
--save that FLICKR ALBUMS site also --to frequently check track work where  there are close-ups of those details!
 
Regards - Best of Luck !!
 
Joe F !
Webmaster - NYC Transit Modelers Group Forum Board
 
====================================================
 
Peter - continuing, the station lights are very tiny micro-midget bulbs of 1.5 volts DC each, wired in series of 8 bulbs.  The EL Column White bands were applied (after very unsuccessfuly painting of same) using 1/4" WHITE auto pinstripe tape, very snugly pressed and fitted around the  EL COLUMN I-beams.
 
Hope the above info help you ! Here are three old photos taken after one particular layout-module's EL structure had repairs made after experiencing some minor damages in transportation via a large 24' long truck to and from a large train show back in 1988 -- sorry for the low quality images, but you see structure without the track.
 
Regards - Joe F
 
 

J. Frank O Scale EL structure-B-1990

J. Frank O Scale EL structure-C-1990

J. Frank O Scale EL structure-D-1990

Attachments

Images (3)
  • J. Frank O Scale EL structure-B-1990
  • J. Frank O Scale EL structure-C-1990
  • J. Frank O Scale EL structure-D-1990
Last edited by Joseph Frank

Hello Tom (MNCW)

 

Thanks also for the compliments and yes, that "EL tracks on street" shadow pattern are one of the most memorable images of being along and under a N Y City EL line structure. (Or Chicago EL for that matter) - especially when the sun is directly overhead, and very strong.

 

Below are some scenes of "Sunshine and Shadows" under the Bronx IRT White Plains Rd Line EL - some on Westchester Avenue portion and some on Southern Blvd segment, this EL line itself being one of the oldest surviving IRT EL structures built in 1903-04, and opened in 1904 by temporary trains coming off the 3rd Ave EL Jct. to it at E.150th St-Westchester Ave.  I am sure you will enjoy these images ! Below those are some scenes along and under my O Scale NY EL -- for shadow replication as I did it.

 

WHERE did you grow up in the Bronx, and what years?  I know every area of the Bronx quite well ! Or if you wish you can private email me your reply to me !

 

PS: for the locations of the real photos, put your cursor over either each photo, or the small thumbnail images at message bottom, and you will see the Location captions.

 

Regards - Joe F

 

 

NE under IRT Westchester Ave EL to Southern Blvd Curve-2011

Lattice Cross Span Bracing on EL Curve-IRT West Farms EL-2011

NE under Westchester Av IRT EL at Simpson St STA-2011

West Farms IRT EL on Southern Blvd-2014

051_51A

IMG_2217-Aug.2010

IMG_2218-Aug.2010

IMG_2223-Aug.2010

Attachments

Images (8)
  • NE under IRT Westchester Ave EL to Southern Blvd Curve-2011
  • Lattice Cross Span Bracing on EL Curve-IRT West Farms EL-2011
  • NE under Westchester Av IRT EL at Simpson St STA-2011
  • West Farms IRT EL on Southern Blvd-2014
  • 051_51A
  • IMG_2217-Aug.2010
  • IMG_2218-Aug.2010
  • IMG_2223-Aug.2010
Last edited by Joseph Frank

Joe,

  I went to Mt. St. Michael (1974-1978) on the border of the Bronx & Mt. Vernon, but lived in Yonkers. Wondering how old you are? Judging by the level of detail, I'm guessing 75-85 years old but watch me be way wrong and you are 22! Feel free to respond by email if you don't want everyone to know.

 

Tom

Hello Patrick (Railride)

 

Yes, I also know that area you worked in very well.  I had an Aunt I and my family visited a lot in the 1950's who lived a few blocks down (east along) Westchester Avenue from that Southern Blvd. intersection - along ANOTHER IRT EL that entered and curved upon and over that same Westchester Avenue - The IRT Pelham EL coming up to it from Whitlock Avenue.  She lived along that EL 2 blocks east of, past, the Bronx River drawbridge on the Avenue. 

 

Here are a few photos from my collection for you to enjoy - YOU know the locations I am sure - some are more recent and some from 50 or more years ago -- the way I remember that entire area back in the 1950's - 1960's period.

 

NOTE: The TWO photos just above the LAST TWO photos - are taken under my O-Scale EL System !

 

Place your cursor over each photo to get a location caption popup.

 

regards - Joe F

 

 

174St STA-White Plains Rd EL-1960

B&W-NE under IRT Westchester Av EL-E.158St-2009

E Under Simpson St Lcl STA-IRT W'chester AV EL-2009

East under Westchester Ave IRT EL-2010

E. under IRT W'chester AV EL-Elton Ave-2011

NW under Wh Pl Rd EL-Simpson St STA-2011

SB WhPLRd Local to Simpson St STA-1959

West on W'chester Ave to Simpson St Station Curve on the EL-1930's

 

 

124_124-Dec.2010

031_31A

 

 

West on Westchester Ave. to Southern Blvd JCT-Simpson St STA-IRT-1930's

S on Southern Bld to Westchester AV-1920

Attachments

Images (12)
  • 174St STA-White Plains Rd EL-1960
  • B&W-NE under IRT Westchester Av EL-E.158St-2009
  • E Under Simpson St Lcl STA-IRT W'chester AV EL-2009
  • East under Westchester Ave IRT EL-2010
  • E. under IRT W'chester AV EL-Elton Ave-2011
  • NW under Wh Pl Rd EL-Simpson St STA-2011
  • SB WhPLRd Local to Simpson St STA-1959
  • West on W'chester Ave to Simpson St Station Curve on the EL-1930's
  • West on Westchester Ave. to Southern Blvd JCT-Simpson St STA-IRT-1930's: West on Westchester Ave. to Southern Blvd JCT-Simpson St STA-IRT-1930's
  • 124_124-Dec.2010
  • 031_31A
  • S on Southern Bld to Westchester AV-1920
Last edited by Joseph Frank

Hello again Spence -- I just realized that THIS thread is about my IRT Elevated Open end Platform EL cars  - and thus this attached VIDEO would be in order here. These are Video Camera VHS Tape video clips shot by me back in 1998, 16 years ago ! I digitally installed them to my computer -- there are different scene clips with sound. Hope you enjoy them...as I tried to replicate the prototypes of these cars when in real service on the EL's

 

Regards !! - Joe F         

Hello again Tom --

 

Already been there - done that long ago - heh !

 

Now you should have figured that I likely already DID THAT -- see these pictures from back in 2008 of a - heh "steam fantrip"  on my EL with one of my modeled 1878 era INTERBOROUGH (IRT) steam era earliest class of EL cars (the one in red)  ---  !!!

 

Regards - Joe F

 

078_78-Aug.2008

074_74A-Aug.2008

075_75-Aug.2008

079_79-Aug.2009

080_80-Aug.2008

077_77-Aug.2008

Attachments

Images (6)
  • 078_78-Aug.2008
  • 074_74A-Aug.2008
  • 075_75-Aug.2008
  • 079_79-Aug.2009
  • 080_80-Aug.2008
  • 077_77-Aug.2008

Yes, I see. Uncle, uncle, we are not worthy! 

 

One thing...I think engine #8209 is clearly in violation of the rule book with a missing headlight!

 

I would be glad to loan you one of my PRR switchers for your next fantrip. I guess it could have been some hooligan that swiped the headlight most likely from some lesser New York City Catholic High School, such as Cardinal Hayes, oops, I guess the cat is out of the bag now, so to speak.

 

Tom

Last edited by PRR8976

Hello Tom

 

Two of the foaming "loons" on the fantrip stole the headlight in darkness just before the daylight fantrip --and as a H/L was not required for daylite running, the trip went on as planned, heh.  However, on some occasions, some strange fantrip equipment do at times violate the sanctity of the "EL" 3rd rail trackage  but then again, its either a diesel (self powered) or in the case of the scratchbuilt NHRR Boxcab, it has LIRR / NYC Subway type 3rd rail shoes for operation on LIRR 3rd rail trackage - so it can visit the EL - as you see. And of course, my scratchbuilt scale model NYCTA (MTA) 50T Diesel electric Work Train Loco -  of course, can power a fantrip if needed...

 

regards - Joe F

IMG_3079

IMG_3076

IMG_3078

011_11

066_66-Dec.2008

075_75

IMG_2620

IMG_2689

IMG_2690

Attachments

Images (9)
  • IMG_3079
  • IMG_3076
  • IMG_3078
  • 011_11
  • 066_66-Dec.2008
  • 075_75
  • IMG_2620
  • IMG_2689
  • IMG_2690

Hello Bill (Subway Depot)

 

Which model work train, or unit,  are you referring to in particular? 

 

If its the NYCTA-MTA GE 50-T work loco, its scratchbuilt.  MOST of my work cars are totally scratch built - none are MTH "work cars" other than a few MTH IRT R-type and IRT Low-V Car bodies painted in the M-o-W Yellow colors....called "Crew Rider Cars".

One of my "Crew Rider" cars in yellow is my scratchbuilt R-21 type Carbody modified with the side windows covered over.  Its at the rear of the work train in my videos.

 

I did take some Lionel-based items and completely re-work and modify them to scale improvements and details ---ie:  my NYCTA BLACK Hopper Cars and my NYCTA YELLOW Hopper Cars are such, and a long center cab loco.  However, 90% of the work cars on my system are scratch built and many are replicas of actual real prototype cars from the wooden EL Car Systems to the steel subway car divisions.

 

Here BELOW is the webpage link to my FLICKR PAGE ALBUM called "O-Scale NYC Transit Work Cars".   There are loads of photos of these cars. 

 

https://www.flickr.com/photos/...s/72157626205010066/

 

ALSO below are 3 short videos of one of my work trains running on the EL. Of course, you will see quite more of my very many work cars in the above FLICKR ALBUM.

 

Regards ! - Joe F

 

 





Last edited by Joseph Frank

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×