Hi Everyone,
The engine in question is a semi-scale ATSF model number K320-3462s
I bought 3 K Line engines ages ago when I first started a layout - didn't have command then so have only ever run this engine in conventional. It has been under the layout for ever but was "rediscovered" today.
It wont run. I apply power and I get Lights all round but no movement or sounds although you do get an electrical noise from the speaker.
I have no instruction manual - can anyone tell me how to do a reset and what number to key in please?
Is the arial in the tender as well? as there is a wire gojng up into the removable top piece where there is a handrail?
I have looked in the tender nothing obviously amiss - check all connections, no broken wires. Engine will not run on its own - I assume I need the tender.
Any ideas/suggestions are most welcome as I live in England so finding anything out over here is a complete no no!
I appreciate this is probably a bit of a highbrid with very early rail sounds
Thanks
MIKE
