LED w/shade source

You should ask Max, he did a how to from his Port Elderly thread. I am sure you could use the same setup for your ceiling lights, Just don't make the light pole bend at the top and make it short like its hanging down.

Here is a link on how he made them!

https://ogrforum.ogaugerr.com/t...se-neck-street-lamps

http://www.ebay.com/itm/401112...e=STRK%3AMEBIDX%3AIT

5 for $7.50 shipped

I got mine at YORK from Scenic Express 4 for $20.  They work and look great for O scale. They come with a bridge rectifier harness that can be hooked up to 6-19 volts AC.  Call RICK at 724-523-2967 or e mail richau936@verizon.net.

Oh I just found his link.

http://ogremodeling.com/led-lighting-page.html

I did these out of my junk box:

Hey Pete, are those lamp shades or just some kind of washers? The look great and I have a 100 or so LED's.

Plastruct Lamp Shades LF-6 and  3mm LED

Craig:

Like Pete I use Plastruct lamp shades (LF-6 and LF-412).  I have a presentation I put together for customers. I will post if you want.

Joe,

I want!!!!!

mike g. posted:

Hey Pete, are those lamp shades or just some kind of washers? The look great and I have a 100 or so LED's.

Just some kind of washers.  As I said, it was all just stuff from my junk box. I am not sure, but I think that they were extra washers from the installation kit that came with an under-counter toaster oven (or maybe a can opener). I never throw stuff like that out. I have a big box labeled "random plastic bits". At this point, I can usually find a reasonable approximation of most any shape I need.  Most of that stuff on the floor of the engine house came from the same box.

V/R:

Please see attached

we offer these lampshades 6 per pack:

http://www.scalecitydesigns.co...-KEIL-LINE_p_54.html

they work with 1.5 led or with grain of wheat bulbs

Thanks Joe

Avanti posted:

mike g. posted:

Hey Pete, are those lamp shades or just some kind of washers? The look great and I have a 100 or so LED's.

Just some kind of washers.  As I said, it was all just stuff from my junk box. I am not sure, but I think that they were extra washers from the installation kit that came with an under-counter toaster oven (or maybe a can opener). I never throw stuff like that out. I have a big box labeled "random plastic bits". At this point, I can usually find a reasonable approximation of most any shape I need.  Most of that stuff on the floor of the engine house came from the same box.

Great to know, I never throw anything out either!

See detailed how-to photos of installing 3mm white LEDs into the Plastruct lampshades by Laidoffsick in:

https://ogrforum.ogaugerr.com/t...77#39441155579719577

The thread also has some ideas on electrical hookup.

Avanti posted:

I did these out of my junk box:

Pete,

what are the "shades" from your junk box??  Looks familiar, but can't seem to decide what the are??

Model Structures posted:

Craig:

Like Pete I use Plastruct lamp shades (LF-6 and LF-412).  I have a presentation I put together for customers. I will post if you want.

Craig,

 Back the truck up a few posts.