Looking for the screws that hold the body to the chassis on the older scale Lionel Erie Lackawanna PA Alco's. I need 12 of them. These have a very long shoulder with the threads on the end.
Thanks
Mark
Original Post
Replies sorted oldest to newest
Mark-
I believe the Erie-Lackawanna PA-1 is the same as the later 6-18952 Santa Fe and 6-18953 New York Central PA-1s catalogued around 2000. If so the screws that hold the shell to the frame are #6-32 x 3/4" Phillips flat head machine screws. If you have a sample you can verify the size and threads with a thread checking gauge.
-John
John,
i believe you are correct on the engines. I stumbled across a couple Erie dummies with no screws. I had the ATSF and NYC but since sold. I had them apart and remember the weird screws. I will take your great info and get to searching. I have several local well supplied hardware outlets. Thanks again for the information.
Happy railroading
Mark
Originally Posted by shawn:
Great info Shawn, will order this week..
have a great day and thanks again
Mark
