Rebuilding this engine I need the two black number boards to this engine or the shell to the a unit with number boards on it thanks
Original Post
Replies sorted oldest to newest
Are you talking about these number boards? If so, it's not that hard to fabricate them, no need to buy a whole shell!
Attachments
Yes but where can I find them for turbine number 5 the big blow
Like I said, you can make them. What I do is create a document in Word with the correct size and type of font, then print it white on black. I cut a piece of clear plastic sheet to the proper dimensions and use canopy glue to stick the lettering on the inside. Install in the cutout and you have your numbers. With a little care, you can have them look very close to the originals.
Wow thanks gunrunner I'll do that
Wow thanks gunrunner I'll do that
Probably easier than trying to hunt down the correct number plates, and sure cheaper than buying a whole shell! 
Working on it now your right
Hi gunrunner wanted to say thanks so much for the idea I took a couple of runs but got the number then put a clear plastic cutout on to looks great thanks again
Great, glad it worked out. It took me a couple tries the first time, but I have made several after that and they look at good as the originals.
