Skip to main content

Originally Posted by electroliner:

This thread brings up a back story on the market. How many modelers exclusively model modern railroads versus how many model the transition era? That seems to have an effect on the constant recycling and reissues of transition era prototypes. Another question.

How many hobbyists model main lines versus short lines? 

I would think it's a classic Catch 22 deal.

That being said, I see little hope for say, a Steeplecab, a Whitcomb, because its another Catch 22..How many modelers have read up on anything other than the common and very well publicized familiar prototypes? I think it would be a minority.

How many mainline transition era models are already in circulation that offer more variety of equipment types and less road names because one hand washes the other?

I think the modelers not the manufacturers drive the market.

Electroliner,

Good comments.  Personally, I like steam, but like steam models manufactured in the modern times so I have good detail and sound and command control.  So the purist would say I should not have anything that the railroads bought new during the transition era.  I wouldn't adhere to that totally, but I wouldn't have any modern equipment either.  I do have two Lionel post war sets, a 2026 and a 621 CNJ switcher, but that was an exceptional situation as to how I came by them.  I like railroad cars and vehicles that fit into the late steam era as well.

 

All that said, since I have a limited budget and space, I do not anticipate acquiring a large collection.  If I had those means, I wouldn't be so specific.  There are scads of modern models out there that are exceptional, and I would acquire if I had more resources.

I have notified MTH that the numbering of the Alaska SD70MACs is incorrect for a passenger unit. ARR's SD70MACs that can be configured for head end power are numbered in the 4300 series.  The 4000-series units can be used in a passenger train, but must be accompanied by a 4300 unit, one of their modified F40PH "control cabs", or an HEP generator car to provide electricity for the train.  If you would also like to see 4300-series SD70MACs, please write to MTH, maybe they will do it....

Originally Posted by clem k:

I see in the new catalog the NYC Hudson as "new york central lines". is that correct?

 

Clem k  

Clem, just another NYC Sub.  Look at the top of the coal bunker.  You see "CCC&St.L."  This is the Cleveland, Cincinnati, Chicago and St. Louis RR sub of the NYC.

 

Should have included in original post here this was otherwise known as the "Big Four."

 

Ron

 

Additional info to add.  Looking through a 64-page soft cover booklet on NYC steam I see that the word "Lines" was changed to the new word "System" mid 1937.

Last edited by PRRronbh

Question on the MTH 44-tonners:  The catalog says up to three road numbers will be available for each road name, but only one catalog number is shown for each road name.  By contrast, the FM C-Liner diesel-electrics have a separate catalog number for each road number and they show the road number.  For example, PRR cab number 9449 is 20-20477-1 and PRR cab number 9451 is 20-20478-1.

 

Is there any way to find out what cab numbers will be available for the 44-tonners and is it possible to specify particular cab numbers when ordering?  

You could try asking MTH customer service for the road numbers. My experience with pre-ordering MTH items is that if there are multiple road numbers on one product number (as is typical with freight cars) some dealers will take an order for a specific road number and some will not. The freight cars are typically shipped out of MTH in cellophane 2-packs with one of each road number. I don't know about the engines; I think they are packaged singly. 
 
Originally Posted by PGentieu:

Question on the MTH 44-tonners:  The catalog says up to three road numbers will be available for each road name, but only one catalog number is shown for each road name.  By contrast, the FM C-Liner diesel-electrics have a separate catalog number for each road number and they show the road number.  For example, PRR cab number 9449 is 20-20477-1 and PRR cab number 9451 is 20-20478-1.

 

Is there any way to find out what cab numbers will be available for the 44-tonners and is it possible to specify particular cab numbers when ordering?  

 

Originally Posted by PGentieu:

Question on the MTH 44-tonners:  The catalog says up to three road numbers will be available for each road name, but only one catalog number is shown for each road name.  By contrast, the FM C-Liner diesel-electrics have a separate catalog number for each road number and they show the road number.  For example, PRR cab number 9449 is 20-20477-1 and PRR cab number 9451 is 20-20478-1.

 

Is there any way to find out what cab numbers will be available for the 44-tonners and is it possible to specify particular cab numbers when ordering?  

If you look up the engines on the MTH website product locator, the cab #'s will be listed there. Also if you look at the online copy of the catalog and you click on the item # for what your interested in it will to the product finder.

 

Bill

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×