Skip to main content

18 replies

MTH NKP BERKSHIRE 30-1316-1 PROBLEM

L Lowes2winOGR Forum Member

I just bought a used Nickel Plate Road MTH Berkshire engine on ebay for $192. I hope that was a deal.  I fixed the headlight and the smoke unit with a new wick. It had no traction tires and i need to buy the right ones.  I bought some today at a local hobby shop and i don't think there the right ones even though they seemed to fit well.  I tried to pull 3 cars and i get traction slip on the curves when accelerating. I cleaned everything with alcohol and it helped but i would like to buy some from a MTH tech on here so I don't have to wait weeks or months from MTH and pay $18 shipping.  If anyone has the right traction tires i would like to buy a half a dozen.  

Also when i add the  engine it finds it and it works fine but then later when i turn the power back on it says check track engine not on track?  I go and delete the engine then re add it and it finds it and it works again but it seems to have dementia because it forgets it again and I have to delete and add it again. Is there a fix for this? Its a 2004 PS2 engine.  

Also not sure what (D) means after the engine address? Also is 1182.1 odometer scale miles or hours?  Also don't know  what Crono means.

Sorry a lot of questions but that's how I learn and figure things out and can share with others in the future.  Any advice or help to fix that would be appreciated.  And if i can buy some of the correct traction tires.  Thank you

Dave.
Uncertified MTH wannabe technician.

20170428_205729Screenshot_20170428-20563220170428_21361920170428_213651 

Attachments

Hide
Images (4)
  • 20170428_205729
  • Screenshot_20170428-205632
  • 20170428_213619
  • 20170428_213651
Last edited by Rich Melvin
Original Post

Replies sorted oldest to newest

Boilermaker1Boilermaker1OGR Forum Member

1184 scale miles, 52 hours of active time. 

"Battery Hi" usually indicates a Bcr. You don't need those in Ps2 and it can prevent the locomotive from storing its address. 

Remove the Bcr and put in a green MTH battery. Add the locomotive, start it up, shut it down then factory reset it. Re add and let it run for a bit. Once you shut it down, if it doesn't remember it's address you may have an issue with the charging circuit on the board. 

Last edited by Boilermaker1
L Lowes2winOGR Forum Member
Boilermaker1 posted:

1184 scale miles, 52 hours of active time. 

"Battery Hi" usually indicates a Bcr. You don't need those in Ps2 and it can prevent the locomotive from storing its address. 

Remove the Bcr and put in a green MTH battery. Add the locomotive, start it up, shut it down then factory reset it. Re add and let it run for a bit. Once you shut it down, if it doesn't remember it's address you may have an issue with the charging circuit on the board. 

Thank you.  There wasnt even a battery in the tender.  OK now 20170429_125742

Attachments

Hide
Images (1)
  • 20170429_125742
G GreggOGR Forum Member

20170429_125742This is not a real indicator of the battery condition, I believe it only means the charging circuit is working. Your engine may have reverted back to an old ID created when the battery was good.... Here's an east test... (conventional or command) ...  get the engine running with sound and then cut the track power. The sounds should continue on for at least 6 or 7 seconds with no track power....

 How long do the sounds continue on?

L Lowes2winOGR Forum Member

With a little work she's as good as new.

Memory problem was because there was no battery. Fixed.  

Had the TIU wires backwards reason it would not add the engine. Fixed.  

Had no traction tires, now has the right ones,  no more wheel slip. Fixed.

New wick added, smokes like a chimmey now.....  Fixed

Thank you guys

Unqualified MTH Technician 20170429_151930

Last edited by Lowes2win
L Lowes2winOGR Forum Member
Gregg posted:

20170429_125742This is not a real indicator of the battery condition, I believe it only means the charging circuit is working. Your engine may have reverted back to an old ID created when the battery was good.... Here's an east test... (conventional or command) ...  get the engine running with sound and then cut the track power. The sounds should continue on for at least 6 or 7 seconds with no track power....

 How long do the sounds continue on?

I took the tender off and the battery was missing. Added the green mth PS2 battery and it working great now. Thank you as always for your troubleshooting time. 

Add Reply

Views: 403
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×