I have checked all of the settings through the DCS system and I get no directional or ditch lights. Any suggestions before opening it up? Any suggestions for after opening and trouble shooting?
First, press the headlight button on the DCS Remote.
If that doesn't do it, do a Feature Reset of the engine as Marty states:
Menu/Advanced/Reset Engine/Feature Reset, scroll to the engine and press the thumbwheel twice.
This and a whole lot more is all in MTH’s “The DCS O Gauge Companion 2nd Edition", available for purchase as an eBook or a printed book at MTH's web store!
If feature reset doesn't work, try factory reset. In those don't work, Not sure if this unit has the spring contacts for those lights. If so I would squeeze shell onto frame/make sure screws holding body on are tight. See if they come on.
If not remove shell and inspect leads from those lights to the plug and where it goes. Could be loose plug, broken wire, or if it is spring contacts not making contact. If springs, stretch springs. G
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!