Re: MTH Twin Stacks

NSmodeler98OGR Forum Member

Ok I have a question about MTH's Norfolk Southern twin stack set 20-90841. How high is it with the containers on it I get how long and wide it is but on the dementions it says 3" so does it mean 3" per container. If anyone with the set or just a twin stack could tell me what the total height is it would be much appreciated.

7/30/155:00 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Randy TOGR Forum Member

NS,

I took one of my BNSF Husky Stacks out and give you the following dimensions:

Single 12 inch long container is 2.5 inches high.

Two Containers stacked in the Husky stack car the height above rail will be 5.5 inches. At our club all tunnel portals and any bridge beam crossing above the rail line must be at least 6.25 inches above rail to provide a margin of error if some one is running a large crane car or pantagraphs on an engine. I hope this helps

7/30/156:31 PM

❤️ 0

Martin HOGR Forum Member

Single-car husky stack is pretty different from the 5-car twin stack. Are you sure that's relevant to his question?

7/30/157:03 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!