Skip to main content

Is the AVC similar to the TPC?  The pictures on the website look similar, but the template for mounting in the manual looks like the ASC/BPC footprint with tabs on the side and a programming jumper sticking out.

 

I am in the midst of measuring the amount of load that various devices put on the serial data output, and I am expecting that the AVC has an optocoupler input like the TPC.

 

The TPC and AVC are the only Lionel devices that I think have optocoupler inputs, and the ZStuff Data Wire Driver also has an opto input.  The ASC/BPC etc. types seem to have direct high-impedance inputs that draw microamps.

 

Thanks in advance for any help.

Original Post

Replies sorted oldest to newest

Hi Dale

The AVC looks EXACTLY like the TPC 300, it is black and the same footprint and wiring posts. I have sent a picture.

 

There is the BPC, ARC, OTC, AMC, ASC as separate devices. The ASC and BPC come in the IC version along with the TPC.

 

Lionel added TMCC control to a couple of accessories, like the Crane. I think a Coaling Station is another, and there are more.

 

hope this helps your endeavor.

 

Ralph

Attachments

Images (2)
  • 100_6714
  • 100_6713

Well, there is the ARC-Action Recorder Controller.  I never understood the functionality of the AVC.  It controls the amount of juice given to accessories, but they are all at the same setting.  It seems I did the same thing without an AVC, using the variable outputs available on an AMC.  It is the only controller box I haven't used.

I guess if you are using Ross switches with DZ 2500 machines, that would count as well.

Dale;

  The accessory voltage controller is the biggest waste of $130 I have ever experienced.  I bought it believing there would be either multiple outputs which could be set at different voltages and addressed by an accessory number, or multiple program addresses which could be adjusted and stored for particular accessories. HA HA!  The thing is nothing but a transformer with a single adjustable output.  Sure you can fine tune your accessory voltage provided that every accessory on the circuit works best at the same voltage.  If not, you have to reset every time you use any accessory, keeping in mind that all other accessories on the circuit will also be set to that voltage.  I created an accessory bus powered at 18 volts, and put a rheostat between the bus and each accessory.  Each rheostat is set to the best voltage for its own accessory.

Much better control than the AVC.

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×