New Monorail jerking( Fixed)

Well, it sure sounds like something wrong, though it might be something simple.

Hi Gunrunner,

When I turn the gears by hand, it binds in the same spot. The plastic gears look good; teeth are not chipped.  It seems like the inner workings of the can motor is not spinning true.

Bob

It'll probably have to come apart to see what's binding.

It can be very frustrating to find something binding. I have a PA that did the same thing. One of the motor shafts was slightly bent causing binding. I sent the faulty motor back and received a new one. Problem solved...not exactly. It was still binding, though not as bad. One of the wheels was slightly out of square with the axle shaft causing it to very slightly contact the sideframe. Straightened the wheel, repositioned the sideframe, problem solved. I've learned at my real job, that sometimes you have to look at multiple areas to track down a problem. You may get very deep into this. If it is new and you don't feel comfortable, you should send it back. I don't think they will honor the warranty if you've already started working on it yourself.

Mike and Gunrunner Thank You!

I took a look at the motor shaft and it was not bent. However, the motor was installed at an angle making it spin out of round. I reinstalled the motor correctly and it runs great.

Thanks,

Bob

Sometimes the simple things bite you.