Skip to main content

Replies sorted oldest to newest

Originally Posted by ADCX Rob:

The triacs have shorted and are putting out full transformer voltage. I have purchased replacements but have not yet installed them in my failed transformer. Unfortunately, it's a ways down my priority list.

Where did you purchase the replacements and how much did they cost?  I assume these triacs you speak of have to be soldered to the circuit board in the transformer?

This thread makes a comment about the triac in the RS-1

 

https://ogrforum.ogaugerr.com/t...nc----not-for-resale

 

I have no knowledge about the RS-1 but the triac used in the MTH Z-controllers which have similar power ratings are about $1-2.  If no one else comes forth with specific info, open it up and post a photo of the board.  We can at least tell you which part is the triac and you should be able to read the markings on the component to find a replacement.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×