Skip to main content

Well yes, MTH did an 0-8-0 and lettered it for N&W, but, a lot of work would need to be done in order to get it to look like an S1 class.

The Lionel 0-8-0 is a bit closer, the tender needing a lot of cosmetic surgery.

 

I think it was Overland that did a brass unstreamlined J. MTH made one too.

Originally Posted by christopher N&W:

N&W 0 Scale Freight Cars

 

 

 

Box Cars

 

Bk (40000-40603) 1919-1958 at least; 40' USRA single sheathed wood, outside braced.

• Atlas 0

Even first digits on Atlas product numbers are 3 rail, odd are 2 rail.

 

 

Atlas 6461/7461  N&W 120041,120086,120255,120379

January 2002

 

 

Atlas 8689/9689 Four Road Numbers

Estimated delivery was April 2007.

 

 

• MTH  

 

MTH 20-93371 N&W 120044, 120049

 

 

 

 

 

MTH 20-90386 N&W 120050, 120058, 120057, 120054, 120062, 120065

MTH 20-90386 N&W 120060, 120052, 120075, 120078, 120073, 120071

 

The MTH USRA boxcars appeared in the 2007 Vol. II catalog.  They were made in three rail only but are designed for conversion to 2 rail trucks and the underframes have Kadee mounting pads.

 

 

• Others?

 

 

 

BPa (41000-41999) 1925-1958 at least; 40' door-and-a-half, steel. Welded half door in 1932-34. New single door in 1945-47.

• Precision Scale (PRR designation X28a?)

 

B1 Round Roof (46000-46799, 47000-47499) 1936-1958 at least; 40' single door, steel.

• Chooch Kit

• Lionel (close) (PRR designation X31) There is a sill at the top of each side that is incorrect for the N&W. The round roof should meet flush with the sides.

• Custom Brass (close) (PRR designation X31) There is a sill at the top of each side that is incorrect for the N&W. The round roof should meet flush with the sides.

 

B2 Round Roof (49200-49299) 1936-1958 at least; 40' double door, steel.

• Chooch Kit (PRR designation X31b?)

• Max Gray (PRR designation X31b?)

 

B3 Round Roof (52000-52299) 1936-1958 at least; 50' double door, steel.

• Custom Brass (PRR designation X32?)

 

B1b (numbers) 1955-1964 at least; 40' double door, steel. Rebuild of B1 eliminating the round roof.

• Atlas 0

The Atlas model has a 1930s/40s style rectangular panel roof.  The mid 1950s N&W rebuilds had diagonal panel roofs.

 

 

Atlas 8721/9721 two road numbers June 2010

 

 

B8 (44000-44999) 1951-1964 at least; 40' Pullman Standard, single door, steel.

• Precision Scale

• Weaver

• Lionel (announced 2014)

• Others?

 

B9 (52700-52799) 1955-1964 at least; 50' Pullman Standard double door, steel.

• Atlas 0

 

Atlas 8407/9407 two road numbers December 2004

 

 

B9a (54800-54849) 1958-1964 at least; 50' Pullman Standard 50' single door 

 

 

Atlas 8880/9880 two road numbers November 2009

 

 

• Pecos River Plastic? probably not. Will give a little more time to make sure. 

 

 

N&W Diesel Era ONLY Box Cars:

 

B139 (numbers) Year-Year. I have not verified the accuracy of this car

 

Atlas has also decorated their 60' Berwick boxcars for the N&W B139s.

Atlas 8623/9623 eight road numbers

    (the last 4 car numbers  Atlas imported the manufacture painted in black. These cars were never in black Paint, Only in boxcar red.

Atlas 8633/9633 eight road numbers

See comments following the category lists as to whether the prototype was ever painted black. These cars are correct.

 

 

 

 

Flat Cars

 

FD (32000-32249) 1913-1958 at least;  38'8" steel; 80 cars converted to pulpwood cars in 1938  

• Weaver (close)

 

FE (32250-32499) 1926-1964 at least; 42' steel

• PAC Limited (close)

• MTH (close)

 

F3 (32800-32849) 1954-1964 at least; 50' steel

• Overland (close)

• Others?

 

 

Gons

 

G3 (70500-70524) G3a (70525-70549) 1941-1964 at least; 65'

• Precision Scale (close) (PRR designation G26)

 

G4 Composite (70600-70699) 1943-1950; 52'

• Pecos River Brass

• PAC Limited

• Weaver

 

G4 Steel (70600-70699) 1951-1964 at least; 52' rebuild of composite gon

• Pecos River Brass

• PAC Limited? not sure

 

 

Covered Hoppers

 

HC1 (70210-70219) 1937-1964 at least

• Precision Scale # 15583-1 (Factory Painted N&W; Duck Yoo Korea) (PRR designation H30)

• Weaver

 

HC5 (71000-71149) 1953-1964 at least; 70 ton, Greenville Built

• Overland (close) O-0734 Overland O scale 70 ton covered hopper is an ACF model with open sides at the center.  N&W HC-5 cars were Greenville cars which are slightly different than the ACF cars.

• Atlas 0  (close) also did and ACF model but not in N&W paint that I know of

 

HC7 (numbers) 1956-1988 at least

• Lionel

• Overland? pretty sure

 

Weaver's troop sleepers were some very nice looking cars when they came out. Little did anyone know the horror story to follow!!!

Read the entire thread to see the carnage. Troop Sleeper Warpage

 

The "J" category should include "611 - 613".

 

Maybe someone could make it to the Brass Expo and see if someone there has information on the older brass N&W locos that were made.

Last edited by Big Jim

Thanks Ted. I included the stock car and image.

 

Jimmy,  the troop sleepers look like bad news. Precision scale also imported troop sleepers so I'll dig a little deeper on that category. I can't believe I missed the 613. I'm not sure what I was thinking since I actually own a 613 model.

 

I think I have a handle on some of the older brass engine imports but we'll see as I go.

The classic post-war Lionel 6446 covered hoppers are good models (for the era) of the N&W HC-3 and are even decorated accordingly.

 

 

Lionel made their two bay 70 ton PS-2 in a single car and a two pack as the 6-17040 and 6-11854.  They are decorated for N&W class HC-7 and look spot on.

 

 

MTH made their PS-2 as the 20-97187 numbered NW 71428 and 71432.  They appeared in the 2006 Vol 2 catalog and are decorated as an HC-9.

 

Lionel has offered their PS-2CD4427s as the single car 6-27135 and 6-21854 three pack.  I believe these are stands-ins for the earlier N&W HC-13 class of 70 ton covered hoppers.

 

 

Atlas made their 6338/7338 model of an ACF cylindrical hopper in two road numbers.  The N&W classified these cars as the HC-15.

 

 

The MTH 20-97690 is a model of the short three bay cylindrical cars built in Canada.  MTH decorated it as a stand in for and ACF built HC-15.

 

 

The MTH 20-97559 Air Slide is numbered NW 341160 and 341164 in the 2004 Vol 2 catalog.  The car numbers are a mystery to me.   N&W had 100 ton air slides in the 71700s number range  as class HC-17.

 

The MTH 20-97255 PS-2CD from 2010 Vol 2 is numbered for NW 176052 and 176085.  It is a stand in for the later 4740 cubic foot hoppers that N&W classed as HC-70.

 

 

Weaver made their PS-2CD4740 in four road numbers in 2006.  It is the correct car type for the HC-70 class.

 

The MTH 20-97748 ACF 2 bay hopper numbered NW 180329, 180325 appeared in the 2012 Vol 2 catalog.  It is an accurate model of an HC-79.

 

Last edited by Ted Hikel

Ted, Thanks for the additions.

 

Guys,

Looking at the list, I think some things are going better than expected, and some other things that I'm still trying to work out.

 

I think the good news is there is so much information here.

 

I think the bad news is there is so much information here. I'm a little concerned that this is going to become enormous and will need to be broken down differently at some point. Some of the sections are a little unwieldy to work with already and I have a ton of information to add.

 

I don't want to discourage input. Please continue to post items as they are valuable even if they are not in the list format yet. I think it will be good to get as much info into the thread from you guys in a short period of time as possible. From that point I'll be able to organize the list without the thread constantly rising to the top of the forum. I'm guessing people will be, if not already, sick of seeing the thread so frequently.

 

I hope you guys will be patient with me and don't get frustrated with the pace. My intention from the beginning is to go deliberately slow on this so I don't get burned out with it.

 

Thanks again for all the input.

Last edited by christopher N&W
Originally Posted by christopher N&W:

 

I think the good news is there is so much information here.

 

I think the bad news is there is so much information here. I'm a little concerned that this is going to become enormous and will need to be broken down.....


I'd like to make a suggestion -- I had thought about it when you first started this topic but didn't express it, and I'm slightly sorry I didn't:

 

I'd recommend you limit the list to the "classic" N&W -- that is, post VGN but before October 1964.   Once you get into the post WAB-NKP era now you've really broadened the scope -- E8's, domes, S2's, etc etc etc.

 

Your interest is transition era, and you share that with a lot of other N&W fans; others who model the blue and NW eras can handle those prototypes, and you can concentrate on what interests you the most.  I think there would be enough in the steam era alone to chew on, let alone digest, for a while.....

 

Just a thought.

 

With best regards, SZ

Steinzeit,

 

I'm thinking that is a good suggestion to narrow the scope. Really, I know my interest and passion is in the steam era, and in that sense it might be best to end it right there in 1960.

 

I feel badly that I let these guys do research and contribute to the thread as they've done and not include their work in some manner. It is included in the heart of  the thread automatically I suppose for use, but I don't want anyone to feel unappreciated and I want them to contribute in the future. I'm thinking the best way to handle it would be to move the diesel era sections of the list into their own section for reference.

Last edited by christopher N&W

Just a suggestion: I thought this thread was coming along quiet well and quickly. After all the work that everyone has done and turn it around and chop it off in 1960. Then I suggest chop off this thread and go off line with it. Anyone interested can email you direct instead of popping this thread to the top of the forum, since you will just will be limiting/narrowing the interest to a fewer number of people. Just count me out from here on. Stephen

PS: There is no such thing as Classic N&W. What a bucket full of ditrty water! Heck - The N&W GP9.5 were classic.

Stephen,

I'm sad to hear that you won't be participating since I know you could give great input on the brass side of things as well. I am not going to chop out the work you've done to this point. I can tell you I could not visualize at the outset how the list would play out with the number of items that would go into each category. I am sorry about that. There are and will be just too many items to make them work well as they are set up now.

 

I'm not too familiar with how pages work on the forum, but I'm actually concerned that with photos I'll be putting in, some of these single categories could exceed a single page. I'm just not sure how the pages work.

 

I'd rather not take the list offline as I need the input of other knowledgeable people, some of whom may only come out of the woodwork if they see the list here. 

 

Also, I'm am so out of my league in the Diesel era that me managing that part of it is really a stretch. I can barely wrap my mind around how many items will be in that category.

 

I can offer this idea. In this thread, set up categories as I did for the diesel era in a line and a bunch of extras. Copy the items we already have into your list, and you can manage the diesel part of the thread. I'll make a note in each of the steam categories referencing the diesel era lists so that people interested in the diesel era will not get left out. I really hope you'll give it some consideration and not stay away. And if you decide not to take on the diesel section, I hope you will come back and contribute for the steam items.

Last edited by christopher N&W

Christopher

 

You might consider a format something like what I have done with the O Scale Freight Car Guide.  Use one thread as a hub with links to other threads with information on each particular car or locomotive type.

 

While I am not an N&W modeler I have become quite familiar with finding things on the Atlas, Lionel and MTH web sites.  I would be happy to continue to contribute as time allows and would also be happy to have you edit my contributions as you see fit to merge with whatever format you chose to use.

 

Thanks for starting this thread.  It is a huge topic, even for a mid sized class one like the N&W but I am glad to see it attempted.  Imagine if we were fans of the ATSF, NYC, PRR or UP! 

Last edited by Ted Hikel

Hi Ted,

 

Thanks. Yes I appreciate what you've done and absolutely welcome any input in the future from you or anyone. At least for now I want to stick with the 1960 break. Any images you or anyone can get from the importers would be appreciated and I'll gladly work them in. I have access to a good number of these models on my own layout, and will be taking some photos, but I'd rather it not all be about my trains. I have prototype images of just about everything on the list in the hopper right now to work in where appropriate. They won't be necessary for everything but I'm giving that a little thought.

 

For now I'm going to stick with this format and see where it takes us. If we run into a block, I'll rework it some way or transfer items. It will work one way or another.

 

If I had to do it over again, I'd have broken the items into smaller cells. One thing I don't understand about forum threads is if I keep adding stuff up front will cells be pushed to another page at some point or will the first page continue to expand down forever? 

 

I'm sorry if I made it sound like I don't want people contributing when I remarked about not having the thread at the top of the list all the time. I want anyone to contribute at any time but I don't want to put any pressure on anyone to make this thread move too quickly, including myself. I'm comfortable if it stays or goes away for weeks or months at a time and then come back to it at another time as more items emerge. I think we have a really solid start here.

Hello fellow 0 Scalers,

 

I've added a bunch of photos to the list. Hopefully these will give a better indication of what each class is about.

 

As always, if you see something to add, dispute, or can answer a question in the list, feel free to reply.

 

I'll be adding more images down the raod including more in the locomotives section.

 

Thanks for looking.

VGN64,

It looks like some of the links from Ted have gone away. It isn't his fault, they went away from the site they were linked to I'm sure.

I've cleaned up the original list on page 1 of all the question mark photos I saw. I can't fix it in other people's posts though. In the future, if someone links a photo, I will download it myself and then re-upload it so they don't go away.

I'll also have more photos to upload in the next month. If anyone else wants to contribute, feel free to do so and I'll add to the list.

Last edited by christopher N&W

Guys,

I finally got around to changing the doors on the Lionel PS1 boxcars. I wound up using the doors from old Atlas cars that were imported in the 70's. They had a little more detail than the Weaver doors and they had 2 sliders in front of the rail at the base of the door. I also had to add a tab on the back of the base of the door so it would slide in the goove. They turned out pretty nice. The car is not bowed, it is distorted by the camera.

IMG_9355 LRIMG_9356 LR

 

B8 (44000-44999) 1951-1964 at least; 40' Pullman Standard, single door, steel.

 

Use B8 2

Photo courtesy of Virginia Tech Image Base

 

Attachments

Images (2)
  • IMG_9355 LR
  • IMG_9356 LR

Hello group,

It has been a while since I've posted to this list and I just completed this car that might be of interest to N&W 0 scale modelers.

The car in the photo is a modified Red Caboose flat car that I made closer to an N&W FD flat.

FD IMG_9378 HR

I had a Red Caboose 42' flat tucked away for several years and decided about a month ago I would simply letter the car as close as I could to an N&W FD. Well, of course the lettering did not fit correctly, so I decided to take the stake pockets off and arrange them better. While I was doing that, I realized the stake pockets on the car were not really close to the prototype so I decided to get some from Grant Line which are closer to the prototype and I put them on instead. In that process I figured I might as well cut out the extra 3/4" from the middle of the car to make the car the proper length. The data on the car is bogus but the car turned out closer than what I had initially.

Here is an image of the prototype.

Use FD 2

Attachments

Images (1)
  • FD IMG_9378 HR
Last edited by christopher N&W
.........cut out the extra 3/4" from the middle of the car to make the car the proper length. ..

Nicely done.   

How did you cut the section out of the middle and marry the 2 remaining halves back together; hard to do/alignment, glue/adhesive, strength/need reinforcement?; re-org of underbody needed?   Inquiring minds want to know!

Thanks guys, I think we were all posting at once.

Rufus,

I snipped out the parts that were in that center section. The only way you'd see the parts is if you turn the car over and that isn't a concern on my layout. There are two straps that hold the weights in the frame and I used a very little Dissolve to loosen them and remove the weights. I did put a little super glue on the braces under the car to make sure they stayed put during the cuts. Then I lined up the car on the mitre saw and carefully cut the car. It fit back together really well. I super glued the two sides. Then I put a very little bit of putty there and sanded.

Bob,

Yes, that car has been on my radar for a long time. I've made 4 of the regular FD cars. The next 2 will be pulpwood cars.

Last edited by christopher N&W
christopher N&W posted:

I snipped out the parts that were in that center section. The only way you'd see the parts is if you turn the car over and that isn't a concern on my layout. There are two straps that hold the weights in the frame and I used a very little Dissolve to loosen them and remove the weights. I did put a little super glue on the braces under the car to make sure they stayed put during the cuts. Then I lined up the car on the mitre saw and carefully cut the car. It fit back together really well. I super glued the two sides. Then I put a very little bit of putty there and sanded.

Thanks!  Super Glue and not a solvent glue to "weld" the styrene.....

The next 2 will be pulpwood cars.

Looking forward to seeing those.....

christopher N&W posted:

Martin,

I  was using the styrene weld from plastruct and it didn't work well if at all on the car. I've used it successfully with styrene before. It made me think the car might not be made out of styrene. You need to bring me some of the government formula at some point and I can experiment with that.

Will do.

Chris, yes that seems the way it goes.

Fellow 0 Scalers,

I've added a few photos as I've recently come across a PAC limited flat car which is close to the N&W 40 foot FE flat. I also added some photos of the PSC Z1b model.

 FE IMG_9702 LRZ1b1363 IMG_6984 LRZ1bT1363 IMG_7016

A few items come to mind that I'll need to add. N&W did have a Shay engine and MTH made a model of it as well as some of the brass importers.

If anyone else would like to contribute items or ideas, please feel free to do so. Otherwise, I'll carry on as is.

Attachments

Images (3)
  • FE IMG_9702 LR
  • Z1b1363 IMG_6984 LR
  • Z1bT1363 IMG_7016
Last edited by christopher N&W
christopher N&W posted:

Hello group,

It has been a while since I've posted to this list and I just completed this car that might be of interest to N&W 0 scale modelers.

The car in the photo is a modified Red Caboose flat car that I made closer to an N&W FD flat.

FD IMG_9378 HR

I had a Red Caboose 42' flat tucked away for several years.......The data on the car is bogus but the car turned out closer than what I had initially.

Here is an image of the prototype.

Use FD 2

I presume you get your correct data from prototype photos?

Simon

Hello group,

I've been able to do a simple project over the past week. This is an MTH car that has been modified. These are some improvements to get it closer to the prototype. The sides of the original plastic boards were filed off flush with the car sides. The car sides on the prototype are taller than the MTH so this worked out pretty well. Then the car was painted and relettered. Then new wood planks were added to the top of the car and stained. The bottom center frame needs some work for another day.

 

Use FE 3

Photo courtesy of Virginia Tech Image Base

 

IMG_9900 LRFE 2

IMG_9896 LR

Attachments

Images (4)
  • IMG_9900 LR
  • IMG_9896 LR
  • FE 1
  • FE 2
Last edited by christopher N&W

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×