Skip to main content

I just finished this scratchbuilt NTTX spine set. My client sent me the main frames and trucks to start the project. It has been a long project but rewarding after seeing it on the track. My layout is not big enough to photograph it properly. Here are a few photos of the set. It will run on 0-42 curves and is 3R although I took the pics on 2R track.

Thanks, Malcolm

 

20140731_1

20140731_2

20140731_3

20140731_4

20140731_5

20140731_6

20140731_7

20140731_8

20140731_9

20140731_12

20140731_13

20140731_14

20140731_15

20140731_16

20140731_17

20140731_18

20140731_19

20140731_20

20140731_21

Attachments

Images (19)
  • 20140731_1
  • 20140731_2
  • 20140731_3
  • 20140731_4
  • 20140731_5
  • 20140731_6
  • 20140731_7
  • 20140731_8
  • 20140731_9
  • 20140731_12
  • 20140731_13
  • 20140731_14
  • 20140731_15
  • 20140731_16
  • 20140731_17
  • 20140731_18
  • 20140731_19
  • 20140731_20
  • 20140731_21
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×