Skip to main content

2 replies

Question for Bob2

N NortonOGR Forum Member

Bob, or anyone, in a previous thread about 3rd Rail's planned Harriman switcher you said you thought the wheel treads on the Stephenson engine would work on 3 rail track. 

 

https://ogrforum.ogaugerr.com/t...-6-0-may-be-canceled

 

I just noticed he is thinking a producing a NYC B11 0-6-0. Since NYC is my primary interest in three rail I am planning to get one if they are produced. Do you think the loco wheels would work unmodified or would different tires wth larger flanges be required? 

I am betting you have machined some driver tires yourself. Would you use something like 303 stainless, another stainless alloy, bronze, or nickle silver?

 

Pete

 

Last edited by Norton
Original Post

Replies sorted oldest to newest

B bob2OGR Forum Member

I am not an expert on tinplate wheel contours.  I suspect that tubular track and switches require the "pizza cutter" style.  If you have no switches and are using T section track (more like an I beam) you should have no trouble.

 

Yes, I have machined more than my share of tires.  Boring! But I rarely consider anything other than iron.  Steel is a second choice, but not stainless.

 

Hi Rail uses traction tires.  Most 2- railers blanch at the thought.  Good grey iron seems to grab the rail and hold on, even when polished.  Stainless, or plated will simply slip.

Add Reply

Views: 381
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×