Is there a way/method to reattach this decal on my Union Pacific tanker? I have had this tanker for years and the decal has been hanging on to the side of the tanker since day 1. I have attached a photo of the tanker and decal problem. Any help or suggestions would be greatly appreciated.
Thanx,
Paul
Replies sorted oldest to newest
I would try a Glue Stic. Take it off all the way use the Glue stick and put ut in place. Should hold.
Thanx Thom - I did try this once before but in time the decal peeled off.
Paul
Some Glue Stics work better that others.
For that I would try carefully trimmed double-sided tape. However, a better solution would be to get some water slide transfers, clean the area really good, and apply them. UP Shields are quite common; I bet Microscale would be an excellent source.
Use Walther's goo. That will hold it but be careful and place glue in the center of the decal and do not place at the edges of the decal. Account for the goo to spread out when you apply pressure to hold the dcsl in place.
Paul,
I concur with Bob2 above. Microscale has some great decal products. Btw, the gazebos arrived perfectly.
Thanx, John - enjoy the gazebos!
Paul
Access to this requires an OGR Forum Supporting Membership
