Looking for some fresh inspiration as to what put in several empty scale gondolas.
I'm not a fan of the factory supplied scrap loads - all of mine were left in the box. But if you've got a new twist on that then bring it on!
-Ralph
|
Looking for some fresh inspiration as to what put in several empty scale gondolas.
I'm not a fan of the factory supplied scrap loads - all of mine were left in the box. But if you've got a new twist on that then bring it on!
-Ralph
Replies sorted oldest to newest
I used pieces of a gas grill that was beyond the state of pos
Back in the day of Conrail I did a lot of video along the CR/NS mainline around the Conway yards. Several times I saw gondolas with RR scrap in them and it was pretty neat. Got one of part of a switcher cab and boxcar sides and laying flat like pieces of a model. Then there was the heavier scrap- wheels, axles and truck parts. Always thought that would make a good scrap load. I also have taken heavy foil, mostly from food packaging and cut it in strips to look like scrap stainless steel.
These are homemade from some rusty metal pieces gathered at work and some Gargraves ties. Check out St. Charles Modelworks if you are looking for gon. loads. Not as cheap as rolling your own but they offer some unique loads such as tie plates and rusty wheels.
I don't have any pictures but I like the Blue Mountain gravel loads, especially for drop bottom gondolas. They are long out of production but you can still find them on the Bay from time to time. The one for the Rail King 4-bay hopper fits the MTH Premier drop-bottom gondola.
Pipe stacks also make good gondola loads, and they are prototypical.
Access to this requires an OGR Forum Supporting Membership