Skip to main content

Replies sorted oldest to newest

I'm with you guys. Start the Steamers, Set Smoke to High and Roll out.

When the cloud makes the far side of the room hard to make out, set the smoke to low and keep rolling.

Wife Hates it when I do that but any kids love it and I like it so I shall continue.

I have switched to nicer smelling smoke for her (And always on the Christmas layout).

In the Old Basement it was Coal Fired Steamer and that stuff is strong.

Originally Posted by gunrunnerjohn:

Maybe the smoke regulator died.  They will smoke in a spectacular fashion for a short time when that happens.

 

I'll second the smoke regulator "going". I've experienced the same thing in a steamer, shortly after, there was no smoke.

 

I don't know that I would run it like that, some folks have mentioned the resistor glowing cherry red. I don't know if thats a good idea in a diesel with a plastic shell.

 

I'd turn it off and replace the regulator.

 

I believe its first on the parts list : CSX Superbass Parts

Last edited by RickO

We had the regulator in a Legacy 10-wheelers let go, in about 20-30 seconds it had destroyed the PCB for the smoke unit.  It was in a long tunnel when it obviously died, when it came out the smoke was spectacular to say the least, I couldn't get to the power switch fast enough!

 

The locomotive still stinks like burnt PCB, and all of that has been replaced.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×