SUPERLINER SLEEPER

Thanks, Cor, for your comments. I think a passenger car without interiors is not a passenger car! so I add all the possible stuff to be close to the reality even if some details will be hidden after!

For the CAMEO: cuting off windows places are never accurate when using x acto knife and a rule and they have to be! I made this bad experiment with my first superliner! I decided to do this cuttings with a plotter and I thought that this one was good for me; I will see....At any rate, I will talk about this attempt on the OGR when I got it.

More photos of the interiors to come.

jpv in France

looking forward for your result with the cameo

Cor

Cor, I have perhaps another idea for the cutting off of the windows, but this requires reflection and attempts!

Here are some shots of the interiors:

The lower level (almost finished):

The upper level (toilets blocks not painted and no passengers yet in the bedrooms!); the cuts in the partitions are made for the LEDS ribbon.

jpv in France

Interiors of the upper level:

The 10 toilets blocks now painted; just behind, the bottom of 3 well cars (I will speak about these later...):

And two other photos with passengers who are here now!

Tomorrow, the leds.......

jpv in France

LED's ribbons I need are not available at this day! the interiors are finished; as I said earlier, I stop the building of the superliner, waiting for a CAMEO to cut the windows places. I don't want to make the same mistakes than the first one!

Meanwhile, I will be busy with the 3 well cars. I'm going to try to find the thread I opened one day and keep on sharing my work with you.

jpv in France