Skip to main content

Lee,

It appears that you and GRJ were among the first here to disassemble this engine so i'll direct my question to you. After i removed the four screws holding the cover to the speaker off, i noticed there were four holes in the speaker frame and four matching threaded holes in the fuel tank BUT no screws! Were these missing on yours as well? The parts list that comes with the engine makes no mention of these screws.
Thanks for your help.

 

jackson

Thanks, Lee. Yes removal of the body was a piece of cake - thanks to your instructions. I was referring to the area inside the fuel tank where the speaker is. There is the cover over the speaker directly under the cab held on by four screws, and then it appears there should be four more screws holding the speaker down to the inside bottom of the fuel tank.

Well, they weren't there from the factory and the sound was fine, so i just reassembled it without them.

 

jackson

Originally Posted by modeltrainsparts:

Thanks, Lee. Yes removal of the body was a piece of cake - thanks to your instructions. I was referring to the area inside the fuel tank where the speaker is. There is the cover over the speaker directly under the cab held on by four screws, and then it appears there should be four more screws holding the speaker down to the inside bottom of the fuel tank.

Well, they weren't there from the factory and the sound was fine, so i just reassembled it without them.

 

jackson

I'm not sure they were there or not on the ones I took apart.  I just do not remember.  

 

I willb e taking another new one apart next week and will check and report. 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×