Skip to main content

Just finishing up on three different tank farms - enjoy

Joe

I need to add rubber for the hoses (I use RC Airplane gas lines). The piping swivels 360 degrees.

Spherical Tank Farm 002Spherical Tank Farm 004

The piping is missing - I shipped it with earlier product to the customer. I was hanging onto this tank farm until the spherical tanks were done. The tanks are 6 inch diameter Plastruct tubing that Plastruct graciously cuts for me since I tend to use a lot of 9 inch long pieces. Even with a table saw cutting a 6 inch diameter tube is difficult.

4 Unit Tank Farm with Pump House [1)

4 Unit Tank Farm with Pump House [2)

4 Unit Tank Farm with Pump House [3)

The spherical tanks are easy to build. I used either 5 inch (first pictures) or 6 inch (below) plastruct hemispheres. I cut a solid circular piece of plastic (much easier than cutting out a ring and having to size it) then glue the hemispheres to both sides.

Spherical Tanks 002

Spherical Tanks 003

Attachments

Images (7)
  • Spherical Tank Farm 002
  • Spherical Tank Farm 004
  • 4 Unit Tank Farm with Pump House (1)
  • 4 Unit Tank Farm with Pump House (2)
  • 4 Unit Tank Farm with Pump House (3)
  • Spherical Tanks 002
  • Spherical Tanks 003
Original Post

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×