Skip to main content

In the "complete guide to command control," on page 30 and 31 it talks about running a conventional AND command engine on the same track using a command base and a powermaster.  My problem is that as soon as the command base is powered up the powermaster stops receiving signal from the cab1 remote so I lose control over track power. Any ideas as to  why this would be happening? 

Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×