Use Fastrack O36 with O22 switches

Keep searching the for sale forum for FasTrack. Some forum sponsors sell new for $80. Search you local craig'slist. if you are patient, you can average about $50-$60 a switch.

The connectors can be removed from the end of a curve and run a 7/64" drill to size the hole for a perfect hole for the O pins.  Then, you can use a FasTrack curve without a transition track. pry the tabs up straight with a screw driver on the bottom a couple of sets, enough to pry up the rails a get the connectors out. The, turn over the track and press on it firmly and flatten the tabs tightly with a flat screw driver. next, ream the hole about a 1/2" in depthe with the drill following the inside of the rail. (see attached pdf, second page)

I believe it's a 45° turn-out, so any curve except O48 will work. O48 will work using s 7.5°+15° for a 22.5° in combinations of the pair.

Thanks for the reply!  I have the 4 transition pieces.  From everything past the turn out will be regular O gauge.