Skip to main content

Originally Posted by jonnyspeed:
Originally Posted by gunrunnerjohn:

I'll get command into it, wait and see.   Maybe sound as well.

 

 

People are installing ESU LokSound DCC sound decoders in N scale 44 Tonners. I can't imagine this model wouldn't have enough room.

Well, the boards for command and sound are not N-scale sizes, so the N-scale experience doesn't have much bearing on what we can do here.

 

Originally Posted by gunrunnerjohn:
Originally Posted by jonnyspeed:
Originally Posted by gunrunnerjohn:

I'll get command into it, wait and see.   Maybe sound as well.

 

 

People are installing ESU LokSound DCC sound decoders in N scale 44 Tonners. I can't imagine this model wouldn't have enough room.

Well, the boards for command and sound are not N-scale sizes, so the N-scale experience doesn't have much bearing on what we can do here.

 

You must be talking about 3 rail and I am talking about 2 rail. That's the difference. A QSI Titan board has more than enough current rating for a small switcher like this and it is only 1.75 x 0.66"X 0.26”. I guarantee there is enough room for one of those.

 

If you are trying to fit the oversized O gauge components, then yes you may have difficulty. Still, I have seen quite a few S gauge engines upgraded to TMCC and RailSounds so it may be possible.

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×