I want to add to this Loco I believe all I need is a 2 modules to plug in? Plus a speaker and volume control. Any help would appreciated, as to what part numbers or model boards I need. New to train upgrades (not new to electronic controls). Thanks Jeff
Replies sorted oldest to newest
If you're running strictly conventional, you'll need the RailSounds power supply and an appropriate diesel sound board. If you plan on running TMCC Command, you'll need the R2LC board as well. The speaker is an 8 ohm speaker in the 1-3 watt power range. I don't know if that fuel tank has provisions for mounting the speaker, if not I typically just put them inside. You'll also have to round up the connectors/cables to connect this stuff to the motherboard.
The speaker is an 8 ohm speaker in the 1-3 watt power range. I don't know if that fuel tank has provisions for
mounting the speaker,
IT should since it's the later "China Drive" loco
For the speaker, goto All Electronics. Bigger magnet and a lot cheaper too!
Remember, there is a maximum height for the speaker to fit into the tank, many are too tall.
Access to this requires an OGR Forum Supporting Membership
