Skip to main content

4 replies

Weaver TMCC 2-rail AC 2-8-0

TP Tom PlattenOGR Forum Member

Iam back!!!! Still getting to know this "unique" locomotive. Today I adapted the leads to my mezzanine layout in my garage so I could feed AC to both outer rails on my Atlas 3-rail track. These were setup to feed DC to the outer rails when I run O scale DC. I used spade connectors so I could continue use the leads for AC or DC. Now all I have to is remember to switch for the appropriate power!!!! I was wondering since the center rail is not being used could I run a Lionel locomotive with the Weaver locomotive? Remember this track has no switches.

Last edited by Tom Platten
Original Post

Replies sorted oldest to newest

AGHRMattAGHRMattOGR Forum Member SUPPORTING MEMBERMEMORIAL SUPPORTER
Tom Platten posted:

I remembered that about two minutes after I posted. No lionel locomotives and cars. Only two rail DC cars! Time to dig out my U.S. Army cars!

Been there/done that. You should see the fun I have at the club when I forget that the last time I ran a particular locomotive was on a 2-rail DCC layout and can't figure out why it doesn't respond on the 3-rail layout. Yep, left it in 2-rail/DCC mode with no pickup rollers installed.

Add Reply

Views: 303
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×