Skip to main content

Down here at Angels Gate Hi Railers in San Pedro, California, we have run them all. TMCC , when it first came out, followed by Legacy. Layout was then adapted for DCS control.  We have all the remotes, CAB1 , Legacy Remote, CAB 1L, DCS Remotes. When Lionel LCS came out, we installed that as well as MTH DCS WIFI, currently running on only one of 5 TIU's.

By far, the ICAB app as well as the DCS WIFI have exhibited the best response by far over all the remotes. No more out of range, or can't find engine and no red lights on CAB2. Today at the club I ran only using the Lionel icab. When we run DCS on only one TIU it runs flawlessly.

In my opinion, once the DCS WIFI comes out, there will be no need to go back to any of the remotes. No more replacing thumb wheels, loose boards and no CAB2 red lights.

The only negative was that my battery drained very quickly after about 4 hours of running. 

For those of you who have ventured into the WIFI era, what's your opinion? Remote or WIFI?

 

 

Original Post

Replies sorted oldest to newest

Personally, I still prefer the remotes, I have both DCS and Legacy. I also wonder if the remotes might still be needed for certain things that the apps may not be able to do. No idea what that might be, but I don't think we will know until we get further along with them. Right now, I only have the MTH wifi, I don't have the Lionel wifi and I am not sure I will be adding it? Maybe someday, but it will be a while.

I prefer a physical button remote myself.  It's nice to feel for a control rather than look.  The High Rail App makes the most use of gesture control more than both iCab and the MTH app so it is somewhat easier to operate some functions without looking at the device. It also takes advantage of the 3D touch of some of the newer iDevices. That being said it's different strokes for different folks.  I don't mind running my trains with an app but I prefer the hardware remote.

Hope all is well with you Jeff.  Hopefully I'll get out to La La land again someday.

Last edited by MartyE

I have 4 remotes, a smart phone, and a tablet.  The last 2 have the app; I have 2 WIU units .  For gimmicking, I will use the app.  But for running trains, I find the remotes let me concentrate on the trains, with a minimum need to spend time searching what's in my hand.  If I have 6 locos running, I find it takes to long to jump around in the app.  On the remote, I can toggle between 2, or hit ENG and ebter the loco #.  Often I will use 2 remotes, speeding up the time needed to go from one loco to another, or from a loco to the switch controls.  But, people have differing tastes, and I shan't tell anyone what is best for their modus operandi.

sphillyj posted:

Thanks for the responses. One of the beauties of the forum is that you learn so many different ways of doing things. Hi Marty, hope all is good with you. I do have a question for you. Is the icab app available for the ipad?

 

Jeff

Jeff, 

Lionel's iCab is designed for iPhone, though it will run on an iPad (it's just not optimized for the phone). Here's a quick list of available iOS apps (from Lionel and third party)

• High Rail: https://itunes.apple.com/us/app/high-rail/id842021291
• iCab: https://itunes.apple.com/us/ap...nel-icab/id920612683
• Lionel LCS: https://itunes.apple.com/us/ap...onel-lcs/id666934678

MTH also has an app, which I hear may include Lionel Legacy engine control (not sure though).

Gentlemen,

   I am a individual remote control operator, I do not like to use WIFI for controlling my layouts.  I wish MTH and Lionel would upgrade their Engines operational capabilities, and their remote rolling stock capabilities also.  MTH needs a completely rechargeable hand held remote control, and both companies need to expand the operating controls of each individual engine program.  Especially allowing LC & LC+ equipment to be controlled with the Legacy Cab2.  IMO WIFI should be a secondary option to all the MTH & Lionel Trains.

PCRR/Dave

Last edited by Pine Creek Railroad

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×