Skip to main content

Reply to "(04/02/24) Something Fun for the O Gauge Hobby from Menards!"

This was a great looking car--for about 5 minutes.  Then the car rocked a little too far on the track at 10+VAC and went dark.  There is connectivity from one truck to another, and from one pickup roller to the other, but not from the truck to the pickup roller(s).  We've taken off the trucks off as well as the endcaps with ladders.  We know that the piece which is the roof and sides fits into the piece which is the bottom and ends.
We ran a pry tool all the way around to break the glue we could find.  This car was screwed, glued, and clipped together.

Endcap

GEDC0002

We cannot figure out which way to bend the 6 clips that go from the sides into the bottom.  Do they bend in (towards center) or out?
One of those pesky clipsthe middle clip
GEDC0013

Help would be greatly appreciated! (especially from @Menards)
The trucks are fancy!
GEDC0008

Attachments

Images (6)
  • Endcap
  • GEDC0002: We ran the pic around the edges, breaking the glue.
  • One of those pesky clips
  • the middle clip
  • GEDC0008
  • GEDC0013

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×