Skip to main content

Reply to "1/4 straight tubular O gauge track?"

I need the short sections due to the peculiar nature of my portable modules. They are sized to accommodate a 4-car Lionel R-27 set but also to be able to negotiate the clearances from my attic down to my driveway.

I cut the sections with a razor saw starting from the underside almost all the way through, then finished cutting from the top of the rail with a Dremel and a cut-off disk.

Any tips for making those little crimps in the rail to hold the pins in place?

Thanks.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×