Chuck Sartor posted:I noticed the reset bell sound is there, but no loco/turbine sounds, just a buzz sound. Also no air release sounds except at the first start up. Does the sound work when not connected to the turbine unit? Is both motors operating in the turbine unit? Looks like the the set is really drawing a lot of power when trying to run. Is the powered A unit dragging the turbine unit? Take the cab off the B unit to verify both the motors are operating when it runs for a short distance.
The turbine sound volume was turned down by me via reset 6 because I wanted to hear the buzz and anything that may be going awry with the board.
It's odd - when I run the A unit alone, no problem, at stall voltage the two motors just try to move but don't. It's just like a normal engine. No buzz. No loss of direction. No falling into reset. But when the B unit is hooked up, what you see and hear in the video is what happens. I just don't know where the dilemma lies.
i have verified that all 4 motors are working correctly.
