Skip to main content

MTH 20-3109-1 Triplex (May 2003) Cab 5015 (P/S2)

I purchased a pristine MTH Triplex recently.  Owner hadn't run it for years and strongly suggested I replace the battery before powering it up. Good advice. I would like to replace the batteries with a BCR.  Then I opened it up and found this: 2 AA Ni-Cd 1.2v batteries. (So I assume it's a 3v system...) (Manual calls for a 1.5v rechargeable NiCad battery...???)

IMG_7167IMG_7168



  They look to be original.   Is there a BCR or equivalent I can use as a substitute for these two batteries?  I know J & W produces a 3v BCR-2 but not sure if or how I could use it.

bcr2-ver-3-trans



  Is there something else available or are my only options to cut the wires to the battery case and install a plug compatible with the J & W BCR-2, if that's OK or, just replace the two Ni-Cd's with two new rechargeable 1.2v 700mAh batteries?

Thanks.

Attachments

Images (3)
  • IMG_7167
  • IMG_7168
  • bcr2-ver-3-trans
Last edited by ToledoEd
Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×