Skip to main content

3-position reverse polarity switch for DC power lines to track?

Hi,

Just to get something up and running, for the cheapest cost, I am going to use a 50 watt AC transformer, which only has two AC terminals, nothing else.  I plan to run the two lines through a Bridge Rectifier at the transformer, and then to the O-27 tracks.

Since the transformer has no reverse switch, I was thinking thinking that I could put a 3-position reverse polarity switch between on lines coming from the rectifier and ending at the track.  (Maybe I am using the wrong words, but by 3-position, I mean up, neutral and down, hopefully a toggle type switch.)

Can anyone recommend a switch for this?   If there is a free standing box switch, this would be fine, but a switch I would mount on the control panel would be fine too.  Looking for an inexpensive, basic, efficient switch, hopefully a Lionel product.

Thanks for all advice.

Mannyrock

 

 

Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×