Skip to main content

Reply to "37147 - Cab-1 L / Base1L Command Set"

ogfan,

   1st the TMCC will not control your P2 engines except in conventional mode, with the Legacy Powermaster.  If you want to run your P2 engines with all the different control options you must have a full DCS, with TIU & hand held remote control.  If you want to run both the TMCC/Legacy engines and your P2 engines you will need to use the DCS in combination with the TMCC/Legacy and the Legacy Powermaster.  I am just getting into Legacy myself but see no problems with it when set up correctly, as Moonman said in a prior post, the CW-80 is not a recommended transformer for running DCS or TMCC Legacy.  IMO the CW-80 is a introductory throw away transformer, that can cause more problems than it's worth, except for running street cars on their own separate line. 

Hope this helps you out a little,

PCRR/Dave

 

 

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×